Diamond-coated solid carbide · factory direct

Diamond-Coated End Mills for Graphite

Choose from 14 graphite-specific tool families and 801 orderable sizes. Ball nose, square end and corner radius geometries use a carbide grade selected for secure diamond-coating adhesion, with every tool dimensionally inspected for abrasive graphite production.

Request a graphite tool quoteBrowse sizes and prices
Diamond-coated solid carbide ball nose end mills for graphite with technical dimensions
14tool families
801SKU sizes
Ø0.2–25 mmdiameter range
2–6flute options

Coating and edge-retention evidence

A diamond coating system engineered for graphite

Graphite rapidly abrades an unprotected carbide edge. Our substrate, coating interface and cutting geometry are designed as one system to keep the edge sharp, protect the profile and support consistent electrode dimensions.

Microscope views of diamond coating adhesion to a carbide substrate

Secure coating-to-carbide interface

The carbide rod grade is selected for diamond deposition compatibility. Its surface chemistry and fine microstructure promote dense nucleation and reduce the risk of premature coating separation.

Diamond coating versus TiAlN cutting edge wear after 60 minutes

About 74% less edge retreat in the shown test

In the supplied carbon-resin comparison, edge retreat after 60 minutes is about 0.006 mm with diamond coating versus 0.023 mm with TiAlN. Lower wear helps preserve cutting geometry.

AK06 fine-grain tungsten carbide grade for diamond-coated graphite tools

AK06 fine-grain carbide substrate

High-quality fine WC powder and controlled grain morphology provide the rigidity, edge integrity and coating compatibility needed for graphite and abrasive composite machining.

ZOLLER optical measurement system inspecting graphite end mill dimensions

ZOLLER dimensional inspection

Verified dimensions on every graphite end mill

Cutter diameter, corner radius, cutting geometry and runout are checked with an optical measurement system. A dimensional report can be supplied for order acceptance and quality traceability.

  • Default cutter diameter tolerance: −0.020 / 0 mm
  • Default corner-radius tolerance: ±0.02 mm
  • Inspection report available on request

14 families · 801 orderable sizes

Graphite end mill sizes, SKUs and USD prices

Search by order code, specification or diameter, then open any family to compare every standard size. All linear dimensions are in millimeters; prices are USD per piece and should be confirmed at order time.

2 Flute Long Shank Ball End Mills for Graphite technical drawing and product view
2GBE · Ball nose

2 Flute Long Shank Ball End Mills for Graphite

Deep-reach 3D electrode contours, ribs, cavities, and semi-finishing.

Diamond coatingBall noseLong shank2 flutes
Diameter range
Ø0.5–25 mm
Standard sizes
77 SKUs
USD price range
$12.80–$587.20 / pc
View all 77 2GBE sizes and prices
Order code / SKUSpecificationDiameterRadiusFlute lengthNeck ØNeck lengthShank ØOverall lengthFlutesUSD / pc
2GBE 005 020 S04D0.5*R0.25*2FL*50 OAL*4SH*2F0.5 mmR0.252 mm——4 mm50 mm2$13.4
2GBE 005 050 S04D0.5*R0.25*2FL*5NL*50 OAL*4SH*2F0.5 mmR0.252 mm—5 mm4 mm50 mm2$13.4
2GBE 010 050 S04D1*R0.5*5FL*60 OAL*4SH*2F1 mmR0.55 mm——4 mm60 mm2$12.8
2GBE 010 050 S06D1*R0.5*5FL*60 OAL*6SH*2F1 mmR0.55 mm——6 mm60 mm2$19.2
2GBE 010 100 S04D1*R0.5*5FL*10NL*60 OAL*4SH*2F1 mmR0.55 mm—10 mm4 mm60 mm2$12.8
2GBE 010 100 S06D1*R0.5*5FL*10NL*60 OAL*6SH*2F1 mmR0.55 mm—10 mm6 mm60 mm2$19.2
2GBE 010 150 S04D1*R0.5*5FL*15NL*60 OAL*4SH*2F1 mmR0.55 mm—15 mm4 mm60 mm2$12.8
2GBE 010 200 S04D1*R0.5*5FL*20NL*60 OAL*4SH*2F1 mmR0.55 mm—20 mm4 mm60 mm2$12.8
2GBE 010 250 S04D1*R0.5*5FL*25NL*70 OAL*4SH*2F1 mmR0.55 mm—25 mm4 mm70 mm2$13.6
2GBE 010 300 S04D1*R0.5*5FL*30NL*80 OAL*4SH*2F1 mmR0.55 mm—30 mm4 mm80 mm2$15.6
2GBE 010 350 S04D1*R0.5*5FL*35NL*80 OAL*4SH*2F1 mmR0.55 mm—35 mm4 mm80 mm2$17
2GBE 010 400 S04D1*R0.5*5FL*40NL*90 OAL*4SH*2F1 mmR0.55 mm—40 mm4 mm90 mm2$19
2GBE 015 080 S06D1.5*R0.75*8FL*60 OAL*6SH*2F1.5 mmR0.758 mm——6 mm60 mm2$19.2
2GBE 015 100 S04D1.5*R0.75*8FL*10NL*60 OAL*4SH*2F1.5 mmR0.758 mm—10 mm4 mm60 mm2$12.8
2GBE 015 150 S04D1.5*R0.75*8FL*15NL*60 OAL*4SH*2F1.5 mmR0.758 mm—15 mm4 mm60 mm2$12.8
2GBE 015 150 S06D1.5*R0.75*8FL*15NL*60 OAL*6SH*2F1.5 mmR0.758 mm—15 mm6 mm60 mm2$19.2
2GBE 015 200 S04D1.5*R0.75*8FL*20NL*60 OAL*4SH*2F1.5 mmR0.758 mm—20 mm4 mm60 mm2$12.8
2GBE 015 250 S04D1.5*R0.75*8FL*25NL*70 OAL*4SH*2F1.5 mmR0.758 mm—25 mm4 mm70 mm2$13.6
2GBE 015 300 S04D1.5*R0.75*8FL*30NL*80 OAL*4SH*2F1.5 mmR0.758 mm—30 mm4 mm80 mm2$15.6
2GBE 015 350 S04D1.5*R0.75*8FL*35NL*80 OAL*4SH*2F1.5 mmR0.758 mm—35 mm4 mm80 mm2$17
2GBE 015 400 S04D1.5*R0.75*8FL*40NL*90 OAL*4SH*2F1.5 mmR0.758 mm—40 mm4 mm90 mm2$19
2GBE 020 100 S04D2*R1*10FL*60 OAL*4SH*2F2 mmR110 mm——4 mm60 mm2$12.8
2GBE 020 100 S06D2*R1*10FL*70 OAL*6SH*2F2 mmR110 mm——6 mm70 mm2$20.4
2GBE 020 150 S04D2*R1*10FL*15NL*60 OAL*4SH*2F2 mmR110 mm—15 mm4 mm60 mm2$12.8
2GBE 020 200 S04D2*R1*10FL*20NL*60 OAL*4SH*2F2 mmR110 mm—20 mm4 mm60 mm2$12.8
2GBE 020 200 S06D2*R1*10FL*20NL*70 OAL*6SH*2F2 mmR110 mm—20 mm6 mm70 mm2$20.4
2GBE 020 250 S04D2*R1*10FL*25NL*70 OAL*4SH*2F2 mmR110 mm—25 mm4 mm70 mm2$13.6
2GBE 020 300 S04D2*R1*10FL*30NL*80 OAL*4SH*2F2 mmR110 mm—30 mm4 mm80 mm2$15.6
2GBE 020 350 S04D2*R1*10FL*35NL*80 OAL*4SH*2F2 mmR110 mm—35 mm4 mm80 mm2$17
2GBE 020 400 S04D2*R1*10FL*40NL*90 OAL*4SH*2F2 mmR110 mm—40 mm4 mm90 mm2$19
2GBE 020 500 S04D2*R1*10FL*50NL*100 OAL*4SH*2F2 mmR110 mm—50 mm4 mm100 mm2$22.4
2GBE 020 600 S04D2*R1*10FL*60NL*100 OAL*4SH*2F2 mmR110 mm—60 mm4 mm100 mm2$25.2
2GBE 025 200 S04D2.5*R1.25*10FL*20NL*70 OAL*4SH*2F2.5 mmR1.2510 mm—20 mm4 mm70 mm2$13.4
2GBE 030 150 100D3*R1.5*15FL*100 OAL*3SH*2F3 mmR1.515 mm——3 mm100 mm2$12.8
2GBE 030 150 S06D3*R1.5*15FL*70 OAL*6SH*2F3 mmR1.515 mm——6 mm70 mm2$20.4
2GBE 030 200 S04D3*R1.5*15FL*20NL*70 OAL*4SH*2F3 mmR1.515 mm—20 mm4 mm70 mm2$13.4
2GBE 030 300 S04D3*R1.5*15FL*30NL*80 OAL*4SH*2F3 mmR1.515 mm—30 mm4 mm80 mm2$15.6
2GBE 030 300 S06D3*R1.5*15FL*30NL*75 OAL*6SH*2F3 mmR1.515 mm—30 mm6 mm75 mm2$22.8
2GBE 030 400 S04D3*R1.5*15FL*40NL*90 OAL*4SH*2F3 mmR1.515 mm—40 mm4 mm90 mm2$19
2GBE 030 400 S06D3*R1.5*15FL*40NL*90 OAL*6SH*2F3 mmR1.515 mm—40 mm6 mm90 mm2$27.4
2GBE 030 500 S04D3*R1.5*15FL*50NL*100 OAL*4SH*2F3 mmR1.515 mm—50 mm4 mm100 mm2$22.4
2GBE 030 600 S04D3*R1.5*15FL*60NL*100 OAL*4SH*2F3 mmR1.515 mm—60 mm4 mm100 mm2$25.2
2GBE 040 200 080D4*R2*20FL*80 OAL*4SH*2F4 mmR220 mm——4 mm80 mm2$14
2GBE 040 200 100D4*R2*20FL*100 OAL*4SH*2F4 mmR220 mm——4 mm100 mm2$15.2
2GBE 040 200 130D4*R2*20FL*130 OAL*4SH*2F4 mmR220 mm——4 mm130 mm2$17.8
2GBE 040 200 S06D4*R2*20FL*75 OAL*6SH*2F4 mmR220 mm——6 mm75 mm2$21.2
2GBE 040 350 S06D4*R2*20FL*35NL*90 OAL*6SH*2F4 mmR220 mm—35 mm6 mm90 mm2$26
2GBE 040 450 S06D4*R2*20FL*45NL*100 OAL*6SH*2F4 mmR220 mm—45 mm6 mm100 mm2$30.2
2GBE 050 250 100D5*R2.5*25FL*100 OAL*5SH*2F5 mmR2.525 mm——5 mm100 mm2$22.2
2GBE 050 250 130D5*R2.5*25FL*130 OAL*5SH*2F5 mmR2.525 mm——5 mm130 mm2$26.4
2GBE 050 250 S06D5*R2.5*25FL*90 OAL*6SH*2F5 mmR2.525 mm——6 mm90 mm2$24.6
2GBE 050 500 S06D5*R2.5*25FL*50NL*110 OAL*6SH*2F5 mmR2.525 mm—50 mm6 mm110 mm2$33.2
2GBE 060 250 110D6*R3*25FL*110 OAL*6SH*2F6 mmR325 mm——6 mm110 mm2$29.4
2GBE 060 300 150D6*R3*30FL*150 OAL*6SH*2F6 mmR330 mm——6 mm150 mm2$36.4
2GBE 060 300 200D6*R3*30FL*200 OAL*6SH*2F6 mmR330 mm——6 mm200 mm2$45.2
2GBE 060 300 220D6*R3*30FL*220 OAL*6SH*2F6 mmR330 mm——6 mm220 mm2$48.8
2GBE 080 350 110D8*R4*35FL*110 OAL*8SH*2F8 mmR435 mm——8 mm110 mm2$42.8
2GBE 080 400 150D8*R4*40FL*150 OAL*8SH*2F8 mmR440 mm——8 mm150 mm2$53.6
2GBE 080 400 200D8*R4*40FL*200 OAL*8SH*2F8 mmR440 mm——8 mm200 mm2$67
2GBE 080 400 220D8*R4*40FL*220 OAL*8SH*2F8 mmR440 mm——8 mm220 mm2$72.4
2GBE 100 400 120D10*R5*40FL*120 OAL*10SH*2F10 mmR540 mm——10 mm120 mm2$65.8
2GBE 100 450 150D10*R5*45FL*150 OAL*10SH*2F10 mmR545 mm——10 mm150 mm2$78.2
2GBE 100 450 200D10*R5*45FL*200 OAL*10SH*2F10 mmR545 mm——10 mm200 mm2$98.6
2GBE 100 450 230D10*R5*45FL*230 OAL*10SH*2F10 mmR545 mm——10 mm230 mm2$110.8
2GBE 120 500 130D12*R6*50FL*130 OAL*12SH*2F12 mmR650 mm——12 mm130 mm2$91.8
2GBE 120 500 150D12*R6*50FL*150 OAL*12SH*2F12 mmR650 mm——12 mm150 mm2$102.8
2GBE 120 550 200D12*R6*55FL*200 OAL*12SH*2F12 mmR655 mm——12 mm200 mm2$130.4
2GBE 120 550 250D12*R6*55FL*250 OAL*12SH*2F12 mmR655 mm——12 mm250 mm2$158
2GBE 160 600 160D16*R8*60FL*160 OAL*16SH*2F16 mmR860 mm——16 mm160 mm2$176.4
2GBE 160 650 200D16*R8*65FL*200 OAL*16SH*2F16 mmR865 mm——16 mm200 mm2$213.8
2GBE 160 650 250D16*R8*65FL*250 OAL*16SH*2F16 mmR865 mm——16 mm250 mm2$260.6
2GBE 160 700 320D16*R8*70FL*320 OAL*16SH*2F16 mmR870 mm——16 mm320 mm2$326
2GBE 200 700 160D20*R10*70FL*160 OAL*20SH*2F20 mmR1070 mm——20 mm160 mm2$260.4
2GBE 200 750 200D20*R10*75FL*200 OAL*20SH*2F20 mmR1075 mm——20 mm200 mm2$317.2
2GBE 200 750 250D20*R10*75FL*250 OAL*20SH*2F20 mmR1075 mm——20 mm250 mm2$388.2
2GBE 200 900 320D20*R10*90FL*320 OAL*20SH*2F20 mmR1090 mm——20 mm320 mm2$487.6
2GBE 250 1000 250D25*R12.5*100FL*250 OAL*25SH*2F25 mmR12.5100 mm——25 mm250 mm2$587.2
2 Flute Taper Neck Ball End Mills for Graphite technical drawing and product view
2TGB · Ball nose

2 Flute Taper Neck Ball End Mills for Graphite

Narrow deep cavities where neck clearance and tool rigidity must be balanced.

Diamond coatingBall noseTaper neck2 flutes
Diameter range
Ø1–12 mm
Standard sizes
27 SKUs
USD price range
$12.80–$217.60 / pc
View all 27 2TGB sizes and prices
Order code / SKUSpecificationDiameterRadiusFlute lengthNeck ØNeck lengthShank ØOverall lengthFlutesUSD / pc
2TGB 010 003 200D1*R0.5*4FL*20NL*60 OAL*4SH*2F1 mmR0.54 mm—20 mm4 mm60 mm2$12.8
2TGB 010 003 300D1*R0.5*4FL*30NL*75 OAL*4SH*2F1 mmR0.54 mm—30 mm4 mm75 mm2$15.4
2TGB 010 003 400D1*R0.5*4FL*40NL*90 OAL*4SH*2F1 mmR0.54 mm—40 mm4 mm90 mm2$19
2TGB 010 010 250D1*R0.5*4FL*25NL*60 OAL*4SH*2F1 mmR0.54 mm—25 mm4 mm60 mm2$13
2TGB 010 010 350D1*R0.5*4FL*35NL*75 OAL*4SH*2F1 mmR0.54 mm—35 mm4 mm75 mm2$16.6
2TGB 010 010 500D1*R0.5*4FL*50NL*100 OAL*4SH*2F1 mmR0.54 mm—50 mm4 mm100 mm2$22.4
2TGB 015 003 300D1.5*R0.75*6FL*30NL*75 OAL*4SH*2F1.5 mmR0.756 mm—30 mm4 mm75 mm2$15.4
2TGB 015 003 400D1.5*R0.75*6FL*40NL*80 OAL*4SH*2F1.5 mmR0.756 mm—40 mm4 mm80 mm2$18.4
2TGB 015 003 500D1.5*R0.75*6FL*50NL*100 OAL*4SH*2F1.5 mmR0.756 mm—50 mm4 mm100 mm2$22.4
2TGB 015 010 300D1.5*R0.75*6FL*30NL*75 OAL*4SH*2F1.5 mmR0.756 mm—30 mm4 mm75 mm2$15.4
2TGB 015 010 500D1.5*R0.75*6FL*50NL*100 OAL*4SH*2F1.5 mmR0.756 mm—50 mm4 mm100 mm2$22.4
2TGB 015 010 600D1.5*R0.75*6FL*60NL*100 OAL*4SH*2F1.5 mmR0.756 mm—60 mm4 mm100 mm2$25.2
2TGB 020 003 400D2*R1*8FL*40NL*90 OAL*4SH*2F2 mmR18 mm—40 mm4 mm90 mm2$19
2TGB 020 003 500D2*R1*8FL*50NL*100 OAL*4SH*2F2 mmR18 mm—50 mm4 mm100 mm2$22.4
2TGB 020 003 700D2*R1*8FL*70NL*130 OAL*4SH*2F2 mmR18 mm—70 mm4 mm130 mm2$30.4
2TGB 020 010 600D2*R1*8FL*60NL*110 OAL*6SH*2F2 mmR18 mm—60 mm6 mm110 mm2$36
2TGB 020 010 900D2*R1*8FL*90NL*150 OAL*6SH*2F2 mmR18 mm—90 mm6 mm150 mm2$51.4
2TGB 030 003 700D3*R1.5*10FL*70NL*120 OAL*6SH*2F3 mmR1.510 mm—70 mm6 mm120 mm2$40.6
2TGB 030 010 900D3*R1.5*10FL*90NL*150 OAL*6SH*2F3 mmR1.510 mm—90 mm6 mm150 mm2$51.4
2TGB 040 003 700D4*R2*14FL*70NL*120 OAL*6SH*2F4 mmR214 mm—70 mm6 mm120 mm2$40.6
2TGB 040 010 800D4*R2*14FL*80NL*150 OAL*6SH*2F4 mmR214 mm—80 mm6 mm150 mm2$48.6
2TGB 050 003 800D5*R2.5*16FL*80NL*130 OAL*6SH*2F5 mmR2.516 mm—80 mm6 mm130 mm2$45
2TGB 060 003 1000D6*R3*16FL*100NL*150 OAL*8SH*2F6 mmR316 mm—100 mm8 mm150 mm2$68
2TGB 060 010 1000D6*R3*16FL*100NL*150 OAL*10SH*2F6 mmR316 mm—100 mm10 mm150 mm2$89.2
2TGB 080 010 1000D8*R4*20FL*100NL*150 OAL*12SH*2F8 mmR420 mm—100 mm12 mm150 mm2$110.6
2TGB 100 010 830D10*R5*25FL*83NL*200 OAL*12SH*2F10 mmR525 mm—83 mm12 mm200 mm2$133.4
2TGB 120 010 1100D12*R6*30FL*110NL*200 OAL*16SH*2F12 mmR630 mm—110 mm16 mm200 mm2$217.6
2 Flute Long Shank Square End Mills for Graphite technical drawing and product view
2GEM · Square end

2 Flute Long Shank Square End Mills for Graphite

Deep slots, pockets, shoulders, and high-chip-clearance roughing.

Diamond coatingSquare endLong shank2 flutes
Diameter range
Ø0.5–20 mm
Standard sizes
37 SKUs
USD price range
$12.80–$487.60 / pc
View all 37 2GEM sizes and prices
Order code / SKUSpecificationDiameterRadiusFlute lengthNeck ØNeck lengthShank ØOverall lengthFlutesUSD / pc
2GEM 005 020 S04D0.5*2FL*50 OAL*4SH*2F0.5 mm—2 mm——4 mm50 mm2$13.4
2GEM 010 050 S04D1*5FL*60 OAL*4SH*2F1 mm—5 mm——4 mm60 mm2$12.8
2GEM 010 100 S04D1*5FL*10NL*60 OAL*4SH*2F1 mm—5 mm—10 mm4 mm60 mm2$12.8
2GEM 010 100 S06D1*5FL*10NL*60 OAL*6SH*2F1 mm—5 mm—10 mm6 mm60 mm2$19.2
2GEM 010 150 S04D1*5FL*15NL*60 OAL*4SH*2F1 mm—5 mm—15 mm4 mm60 mm2$12.8
2GEM 010 200 S04D1*5FL*20NL*60 OAL*4SH*2F1 mm—5 mm—20 mm4 mm60 mm2$12.8
2GEM 010 250 S04D1*5FL*25NL*70 OAL*4SH*2F1 mm—5 mm—25 mm4 mm70 mm2$13.6
2GEM 015 100 S04D1.5*10FL*60 OAL*4SH*2F1.5 mm—10 mm——4 mm60 mm2$12.8
2GEM 015 150 S04D1.5*8FL*15NL*60 OAL*4SH*2F1.5 mm—8 mm—15 mm4 mm60 mm2$12.8
2GEM 015 200 S04D1.5*8FL*20NL*60 OAL*4SH*2F1.5 mm—8 mm—20 mm4 mm60 mm2$12.8
2GEM 015 200 S06D1.5*8FL*20NL*60 OAL*6SH*2F1.5 mm—8 mm—20 mm6 mm60 mm2$19.2
2GEM 015 250 S04D1.5*8FL*25NL*70 OAL*4SH*2F1.5 mm—8 mm—25 mm4 mm70 mm2$13.6
2GEM 020 100 S04D2*10FL*60 OAL*4SH*2F2 mm—10 mm——4 mm60 mm2$12.8
2GEM 020 150 S04D2*10FL*15NL*60 OAL*4SH*2F2 mm—10 mm—15 mm4 mm60 mm2$12.8
2GEM 020 200 S04D2*10FL*20NL*60 OAL*4SH*2F2 mm—10 mm—20 mm4 mm60 mm2$12.8
2GEM 020 200 S06D2*10FL*20NL*60 OAL*6SH*2F2 mm—10 mm—20 mm6 mm60 mm2$19.2
2GEM 020 250 S04D2*10FL*25NL*70 OAL*4SH*2F2 mm—10 mm—25 mm4 mm70 mm2$13.6
2GEM 020 300 S04D2*10FL*30NL*80 OAL*4SH*2F2 mm—10 mm—30 mm4 mm80 mm2$15.6
2GEM 030 150 S04D3*15FL*70 OAL*4SH*2F3 mm—15 mm——4 mm70 mm2$13.4
2GEM 030 250 S04D3*15FL*25NL*75 OAL*4SH*2F3 mm—15 mm—25 mm4 mm75 mm2$14
2GEM 030 300 S06D3*15FL*30NL*75 OAL*6SH*2F3 mm—15 mm—30 mm6 mm75 mm2$22.8
2GEM 040 200 100D4*20FL*100 OAL*4SH*2F4 mm—20 mm——4 mm100 mm2$15.2
2GEM 040 400 S06D4*20FL*40NL*100 OAL*6SH*2F4 mm—20 mm—40 mm6 mm100 mm2$28.8
2GEM 050 250 100D5*25FL*100 OAL*5SH*2F5 mm—25 mm——5 mm100 mm2$22.2
2GEM 060 300 110D6*30FL*110 OAL*6SH*2F6 mm—30 mm——6 mm110 mm2$29.4
2GEM 060 300 150D6*30FL*150 OAL*6SH*2F6 mm—30 mm——6 mm150 mm2$36.4
2GEM 080 400 150D8*40FL*150 OAL*8SH*2F8 mm—40 mm——8 mm150 mm2$53.6
2GEM 100 450 150D10*45FL*150 OAL*10SH*2F10 mm—45 mm——10 mm150 mm2$78.2
2GEM 100 500 200D10*50FL*200 OAL*10SH*2F10 mm—50 mm——10 mm200 mm2$98.6
2GEM 120 600 150D12*60FL*150 OAL*12SH*2F12 mm—60 mm——12 mm150 mm2$102.8
2GEM 120 600 200D12*60FL*200 OAL*12SH*2F12 mm—60 mm——12 mm200 mm2$130.4
2GEM 160 600 130D16*60FL*130 OAL*16SH*2F16 mm—60 mm——16 mm130 mm2$148.2
2GEM 160 700 160D16*70FL*160 OAL*16SH*2F16 mm—70 mm——16 mm160 mm2$176.4
2GEM 160 700 200D16*70FL*200 OAL*16SH*2F16 mm—70 mm——16 mm200 mm2$213.8
2GEM 200 1200 320D20*120FL*320 OAL*20SH*2F20 mm—120 mm——20 mm320 mm2$487.6
2GEM 200 800 160D20*80FL*160 OAL*20SH*2F20 mm—80 mm——20 mm160 mm2$260.4
2GEM 200 900 200D20*90FL*200 OAL*20SH*2F20 mm—90 mm——20 mm200 mm2$317.2
4 Flute Long Shank Square End Mills for Graphite technical drawing and product view
4GEM · Square end

4 Flute Long Shank Square End Mills for Graphite

Stable side milling and finer finishes in deep graphite features.

Diamond coatingSquare endLong shank4 flutes
Diameter range
Ø3–20 mm
Standard sizes
19 SKUs
USD price range
$15.20–$487.60 / pc
View all 19 4GEM sizes and prices
Order code / SKUSpecificationDiameterRadiusFlute lengthNeck ØNeck lengthShank ØOverall lengthFlutesUSD / pc
4GEM 030 100 S06D3*10FL*100 OAL*6SH*4F3 mm—10 mm——6 mm100 mm4$24.4
4GEM 030 150 S06D3*15FL*100 OAL*6SH*4F3 mm—15 mm——6 mm100 mm4$24.4
4GEM 040 150 S06D4*15FL*100 OAL*6SH*4F4 mm—15 mm——6 mm100 mm4$24.4
4GEM 040 200 100D4*20FL*100 OAL*4SH*4F4 mm—20 mm——4 mm100 mm4$15.2
4GEM 040 200 S06D4*20FL*100 OAL*6SH*4F4 mm—20 mm——6 mm100 mm4$24.4
4GEM 050 200 S06D5*20FL*100 OAL*6SH*4F5 mm—20 mm——6 mm100 mm4$26
4GEM 060 300 110D6*30FL*110 OAL*6SH*4F6 mm—30 mm——6 mm110 mm4$29.4
4GEM 060 300 150D6*30FL*150 OAL*6SH*4F6 mm—30 mm——6 mm150 mm4$36.4
4GEM 080 400 150D8*40FL*150 OAL*8SH*4F8 mm—40 mm——8 mm150 mm4$53.6
4GEM 080 400 200D8*40FL*200 OAL*8SH*4F8 mm—40 mm——8 mm200 mm4$67
4GEM 100 500 150D10*50FL*150 OAL*10SH*4F10 mm—50 mm——10 mm150 mm4$78.2
4GEM 100 500 200D10*50FL*200 OAL*10SH*4F10 mm—50 mm——10 mm200 mm4$98.6
4GEM 120 600 150D12*60FL*150 OAL*12SH*4F12 mm—60 mm——12 mm150 mm4$102.8
4GEM 120 600 200D12*60FL*200 OAL*12SH*4F12 mm—60 mm——12 mm200 mm4$130.4
4GEM 160 700 160D16*70FL*160 OAL*16SH*4F16 mm—70 mm——16 mm160 mm4$176.4
4GEM 160 800 200D16*80FL*200 OAL*16SH*4F16 mm—80 mm——16 mm200 mm4$213.8
4GEM 200 1000 320D20*100FL*320 OAL*20SH*4F20 mm—100 mm——20 mm320 mm4$487.6
4GEM 200 750 160D20*75FL*160 OAL*20SH*4F20 mm—75 mm——20 mm160 mm4$260.4
4GEM 200 900 200D20*90FL*200 OAL*20SH*4F20 mm—90 mm——20 mm200 mm4$317.2
6 Flute 45° Long Shank End Mills for Graphite technical drawing and product view
6GEM · Square end

6 Flute 45° Long Shank End Mills for Graphite

High-speed finishing with reduced vibration and a fine wall finish.

Diamond coatingSquare endLong shank6 flutes
Diameter range
Ø6–20 mm
Standard sizes
12 SKUs
USD price range
$29.40–$487.60 / pc
View all 12 6GEM sizes and prices
Order code / SKUSpecificationDiameterRadiusFlute lengthNeck ØNeck lengthShank ØOverall lengthFlutesUSD / pc
6GEM 060 300 110D6*30FL*110 OAL*6SH*6F6 mm—30 mm——6 mm110 mm6$29.4
6GEM 080 400 110D8*40FL*110 OAL*8SH*6F8 mm—40 mm——8 mm110 mm6$42.8
6GEM 100 500 120D10*50FL*120 OAL*10SH*6F10 mm—50 mm——10 mm120 mm6$65.8
6GEM 100 500 150D10*50FL*150 OAL*10SH*6F10 mm—50 mm——10 mm150 mm6$78.2
6GEM 120 600 130D12*60FL*130 OAL*12SH*6F12 mm—60 mm——12 mm130 mm6$91.8
6GEM 120 600 160D12*60FL*160 OAL*12SH*6F12 mm—60 mm——12 mm160 mm6$108.4
6GEM 160 900 160D16*90FL*160 OAL*16SH*6F16 mm—90 mm——16 mm160 mm6$176.4
6GEM 160 900 200D16*90FL*200 OAL*16SH*6F16 mm—90 mm——16 mm200 mm6$213.8
6GEM 160 900 250D16*90FL*250 OAL*16SH*6F16 mm—90 mm——16 mm250 mm6$260.6
6GEM 200 1000 200D20*100FL*200 OAL*20SH*6F20 mm—100 mm——20 mm200 mm6$317.2
6GEM 200 1000 250D20*100FL*250 OAL*20SH*6F20 mm—100 mm——20 mm250 mm6$388.2
6GEM 200 1000 320D20*100FL*320 OAL*20SH*6F20 mm—100 mm——20 mm320 mm6$487.6
2 Flute Diamond Coated Ball End Mills for Graphite technical drawing and product view
2DBE · Ball nose

2 Flute Diamond Coated Ball End Mills for Graphite

Micro to medium 3D profiling with maximum chip space.

Diamond coatingBall noseStandard reach2 flutes
Diameter range
Ø0.2–12 mm
Standard sizes
120 SKUs
USD price range
$12.80–$130.40 / pc
View all 120 2DBE sizes and prices
Order code / SKUSpecificationDiameterRadiusFlute lengthNeck ØNeck lengthShank ØOverall lengthFlutesUSD / pc
2DBE 002 010 S04D0.2*R0.1*1FL*45 OAL*4SH*2F0.2 mmR0.11 mm——4 mm45 mm2$13
2DBE 003 012 S04D0.3*R0.15*1.2FL*45 OAL*4SH*2F0.3 mmR0.151.2 mm——4 mm45 mm2$13
2DBE 003 020 S04D0.3*R0.15*1.2FL*2NL*45 OAL*4SH*2F0.3 mmR0.151.2 mm—2 mm4 mm45 mm2$13
2DBE 004 015 S04D0.4*R0.2*1.5FL*45 OAL*4SH*2F0.4 mmR0.21.5 mm——4 mm45 mm2$13
2DBE 004 020 S04D0.4*R0.2*1.5FL*2NL*45 OAL*4SH*2F0.4 mmR0.21.5 mm—2 mm4 mm45 mm2$13
2DBE 004 030 S04D0.4*R0.2*1.5FL*3NL*45 OAL*4SH*2F0.4 mmR0.21.5 mm—3 mm4 mm45 mm2$13
2DBE 004 040 S04D0.4*R0.2*1.5FL*4NL*45 OAL*4SH*2F0.4 mmR0.21.5 mm—4 mm4 mm45 mm2$13
2DBE 004 050 S04D0.4*R0.2*1.5FL*5NL*45 OAL*4SH*2F0.4 mmR0.21.5 mm—5 mm4 mm45 mm2$13
2DBE 004 080 S04D0.4*R0.2*1.5FL*8NL*45 OAL*4SH*2F0.4 mmR0.21.5 mm—8 mm4 mm45 mm2$13
2DBE 004 100 S04D0.4*R0.2*1.5FL*10NL*45 OAL*4SH*2F0.4 mmR0.21.5 mm—10 mm4 mm45 mm2$13
2DBE 005 020 S04D0.5*R0.25*2FL*45 OAL*4SH*2F0.5 mmR0.252 mm——4 mm45 mm2$13
2DBE 005 030 S04D0.5*R0.25*2FL*3NL*45 OAL*4SH*2F0.5 mmR0.252 mm—3 mm4 mm45 mm2$13
2DBE 005 040 S04D0.5*R0.25*2FL*4NL*45 OAL*4SH*2F0.5 mmR0.252 mm—4 mm4 mm45 mm2$13
2DBE 005 050 S04D0.5*R0.25*2FL*5NL*45 OAL*4SH*2F0.5 mmR0.252 mm—5 mm4 mm45 mm2$13
2DBE 005 060 S04D0.5*R0.25*2FL*6NL*45 OAL*4SH*2F0.5 mmR0.252 mm—6 mm4 mm45 mm2$13
2DBE 005 080 S04D0.5*R0.25*2FL*8NL*45 OAL*4SH*2F0.5 mmR0.252 mm—8 mm4 mm45 mm2$13
2DBE 005 100 S04D0.5*R0.25*2FL*10NL*45 OAL*4SH*2F0.5 mmR0.252 mm—10 mm4 mm45 mm2$13
2DBE 005 120 S04D0.5*R0.25*2FL*12NL*45 OAL*4SH*2F0.5 mmR0.252 mm—12 mm4 mm45 mm2$13
2DBE 006 020 S04D0.6*R0.3*2FL*45 OAL*4SH*2F0.6 mmR0.32 mm——4 mm45 mm2$13
2DBE 006 030 S04D0.6*R0.3*2FL*3NL*45 OAL*4SH*2F0.6 mmR0.32 mm—3 mm4 mm45 mm2$13
2DBE 006 040 S04D0.6*R0.3*2FL*4NL*45 OAL*4SH*2F0.6 mmR0.32 mm—4 mm4 mm45 mm2$13
2DBE 006 050 S04D0.6*R0.3*2FL*5NL*45 OAL*4SH*2F0.6 mmR0.32 mm—5 mm4 mm45 mm2$13
2DBE 006 060 S04D0.6*R0.3*2FL*6NL*45 OAL*4SH*2F0.6 mmR0.32 mm—6 mm4 mm45 mm2$13
2DBE 006 080 S04D0.6*R0.3*2FL*8NL*45 OAL*4SH*2F0.6 mmR0.32 mm—8 mm4 mm45 mm2$13
2DBE 006 100 S04D0.6*R0.3*2FL*10NL*45 OAL*4SH*2F0.6 mmR0.32 mm—10 mm4 mm45 mm2$13
2DBE 006 120 S04D0.6*R0.3*2FL*12NL*45 OAL*4SH*2F0.6 mmR0.32 mm—12 mm4 mm45 mm2$13
2DBE 006 150 S04D0.6*R0.3*2FL*15NL*45 OAL*4SH*2F0.6 mmR0.32 mm—15 mm4 mm45 mm2$13
2DBE 006 200 S04D0.6*R0.3*2FL*20NL*45 OAL*4SH*2F0.6 mmR0.32 mm—20 mm4 mm45 mm2$13
2DBE 008 030 S04D0.8*R0.4*3FL*45 OAL*4SH*2F0.8 mmR0.43 mm——4 mm45 mm2$13
2DBE 008 040 S04D0.8*R0.4*3FL*4NL*45 OAL*4SH*2F0.8 mmR0.43 mm—4 mm4 mm45 mm2$13
2DBE 008 050 S04D0.8*R0.4*3FL*5NL*45 OAL*4SH*2F0.8 mmR0.43 mm—5 mm4 mm45 mm2$13
2DBE 008 060 S04D0.8*R0.4*3FL*6NL*45 OAL*4SH*2F0.8 mmR0.43 mm—6 mm4 mm45 mm2$13
2DBE 008 080 S04D0.8*R0.4*3FL*8NL*45 OAL*4SH*2F0.8 mmR0.43 mm—8 mm4 mm45 mm2$13
2DBE 008 100 S04D0.8*R0.4*3FL*10NL*45 OAL*4SH*2F0.8 mmR0.43 mm—10 mm4 mm45 mm2$13
2DBE 008 150 S04D0.8*R0.4*3FL*15NL*45 OAL*4SH*2F0.8 mmR0.43 mm—15 mm4 mm45 mm2$13
2DBE 008 200 S04D0.8*R0.4*3FL*20NL*45 OAL*4SH*2F0.8 mmR0.43 mm—20 mm4 mm45 mm2$13
2DBE 010 030 S04D1*R0.5*3FL*60 OAL*4SH*2F1 mmR0.53 mm——4 mm60 mm2$12.8
2DBE 010 040 S04D1*R0.5*3FL*4NL*60 OAL*4SH*2F1 mmR0.53 mm—4 mm4 mm60 mm2$12.8
2DBE 010 050 S04D1*R0.5*3FL*5NL*60 OAL*4SH*2F1 mmR0.53 mm—5 mm4 mm60 mm2$12.8
2DBE 010 060 S04D1*R0.5*3FL*6NL*60 OAL*4SH*2F1 mmR0.53 mm—6 mm4 mm60 mm2$12.8
2DBE 010 080 S04D1*R0.5*3FL*8NL*60 OAL*4SH*2F1 mmR0.53 mm—8 mm4 mm60 mm2$12.8
2DBE 010 100 S04D1*R0.5*3FL*10NL*60 OAL*4SH*2F1 mmR0.53 mm—10 mm4 mm60 mm2$12.8
2DBE 010 120 S04D1*R0.5*3FL*12NL*60 OAL*4SH*2F1 mmR0.53 mm—12 mm4 mm60 mm2$12.8
2DBE 010 150 S04D1*R0.5*3FL*15NL*60 OAL*4SH*2F1 mmR0.53 mm—15 mm4 mm60 mm2$12.8
2DBE 010 200 S04D1*R0.5*3FL*20NL*60 OAL*4SH*2F1 mmR0.53 mm—20 mm4 mm60 mm2$12.8
2DBE 010 250 S04D1*R0.5*3FL*25NL*80 OAL*4SH*2F1 mmR0.53 mm—25 mm4 mm80 mm2$14.2
2DBE 010 300 S04D1*R0.5*3FL*30NL*80 OAL*4SH*2F1 mmR0.53 mm—30 mm4 mm80 mm2$15.6
2DBE 010 350 S04D1*R0.5*3FL*35NL*80 OAL*4SH*2F1 mmR0.53 mm—35 mm4 mm80 mm2$17
2DBE 010 400 S04D1*R0.5*3FL*40NL*80 OAL*4SH*2F1 mmR0.53 mm—40 mm4 mm80 mm2$18.4
2DBE 010 450 S04D1*R0.5*3FL*45NL*80 OAL*4SH*2F1 mmR0.53 mm—45 mm4 mm80 mm2$19.8
2DBE 010 500 S04D1*R0.5*3FL*50NL*80 OAL*4SH*2F1 mmR0.53 mm—50 mm4 mm80 mm2$21.2
2DBE 015 045 S04D1.5*R0.75*4.5FL*60 OAL*4SH*2F1.5 mmR0.754.5 mm——4 mm60 mm2$12.8
2DBE 015 080 S04D1.5*R0.75*4.5FL*8NL*80 OAL*4SH*2F1.5 mmR0.754.5 mm—8 mm4 mm80 mm2$14
2DBE 015 100 S04D1.5*R0.75*4.5FL*10NL*80 OAL*4SH*2F1.5 mmR0.754.5 mm—10 mm4 mm80 mm2$14
2DBE 015 120 S04D1.5*R0.75*4.5FL*12NL*80 OAL*4SH*2F1.5 mmR0.754.5 mm—12 mm4 mm80 mm2$14
2DBE 015 150 S04D1.5*R0.75*4.5FL*15NL*80 OAL*4SH*2F1.5 mmR0.754.5 mm—15 mm4 mm80 mm2$14
2DBE 015 180 S04D1.5*R0.75*4.5FL*18NL*80 OAL*4SH*2F1.5 mmR0.754.5 mm—18 mm4 mm80 mm2$14
2DBE 015 200 S04D1.5*R0.75*4.5FL*20NL*80 OAL*4SH*2F1.5 mmR0.754.5 mm—20 mm4 mm80 mm2$14
2DBE 015 250 S04D1.5*R0.75*4.5FL*25NL*80 OAL*4SH*2F1.5 mmR0.754.5 mm—25 mm4 mm80 mm2$14.2
2DBE 015 300 S04D1.5*R0.75*4.5FL*30NL*80 OAL*4SH*2F1.5 mmR0.754.5 mm—30 mm4 mm80 mm2$15.6
2DBE 015 350 S04D1.5*R0.75*4.5FL*35NL*80 OAL*4SH*2F1.5 mmR0.754.5 mm—35 mm4 mm80 mm2$17
2DBE 015 400 S04D1.5*R0.75*4.5FL*40NL*80 OAL*4SH*2F1.5 mmR0.754.5 mm—40 mm4 mm80 mm2$18.4
2DBE 020 060 S04D2*R1*6FL*60 OAL*4SH*2F2 mmR16 mm——4 mm60 mm2$12.8
2DBE 020 100 S04D2*R1*6FL*10NL*80 OAL*4SH*2F2 mmR16 mm—10 mm4 mm80 mm2$14
2DBE 020 150 S04D2*R1*6FL*15NL*80 OAL*4SH*2F2 mmR16 mm—15 mm4 mm80 mm2$14
2DBE 020 200 S04D2*R1*6FL*20NL*80 OAL*4SH*2F2 mmR16 mm—20 mm4 mm80 mm2$14
2DBE 020 250 S04D2*R1*6FL*25NL*80 OAL*4SH*2F2 mmR16 mm—25 mm4 mm80 mm2$14.2
2DBE 020 300 S04D2*R1*6FL*30NL*80 OAL*4SH*2F2 mmR16 mm—30 mm4 mm80 mm2$15.6
2DBE 020 350 S04D2*R1*6FL*35NL*80 OAL*4SH*2F2 mmR16 mm—35 mm4 mm80 mm2$17
2DBE 020 400 S04D2*R1*6FL*40NL*100 OAL*4SH*2F2 mmR16 mm—40 mm4 mm100 mm2$19.6
2DBE 020 450 S04D2*R1*6FL*45NL*100 OAL*4SH*2F2 mmR16 mm—45 mm4 mm100 mm2$21
2DBE 020 500 S04D2*R1*6FL*50NL*100 OAL*4SH*2F2 mmR16 mm—50 mm4 mm100 mm2$22.4
2DBE 020 600 S04D2*R1*6FL*60NL*100 OAL*4SH*2F2 mmR16 mm—60 mm4 mm100 mm2$25.2
2DBE 020 700 S04D2*R1*6FL*70NL*100 OAL*4SH*2F2 mmR16 mm—70 mm4 mm100 mm2$27.8
2DBE 030 080 S04D3*R1.5*8FL*60 OAL*4SH*2F3 mmR1.58 mm——4 mm60 mm2$12.8
2DBE 030 080 S06D3*R1.5*3FL*8NL*60 OAL*6SH*2F3 mmR1.53 mm—8 mm6 mm60 mm2$19.2
2DBE 030 150 100D3*R1.5*8FL*15NL*100 OAL*3SH*2F3 mmR1.58 mm—15 mm3 mm100 mm2$12.8
2DBE 030 150 S04D3*R1.5*8FL*15NL*100 OAL*4SH*2F3 mmR1.58 mm—15 mm4 mm100 mm2$15.2
2DBE 030 200 S04D3*R1.5*8FL*20NL*100 OAL*4SH*2F3 mmR1.58 mm—20 mm4 mm100 mm2$15.2
2DBE 030 250 S04D3*R1.5*8FL*25NL*100 OAL*4SH*2F3 mmR1.58 mm—25 mm4 mm100 mm2$15.4
2DBE 030 300 S04D3*R1.5*8FL*30NL*100 OAL*4SH*2F3 mmR1.58 mm—30 mm4 mm100 mm2$16.8
2DBE 030 350 S04D3*R1.5*8FL*35NL*100 OAL*4SH*2F3 mmR1.58 mm—35 mm4 mm100 mm2$18.2
2DBE 030 400 S04D3*R1.5*8FL*40NL*100 OAL*4SH*2F3 mmR1.58 mm—40 mm4 mm100 mm2$19.6
2DBE 030 500 S04D3*R1.5*8FL*50NL*100 OAL*4SH*2F3 mmR1.58 mm—50 mm4 mm100 mm2$22.4
2DBE 030 600 S04D3*R1.5*8FL*60NL*100 OAL*4SH*2F3 mmR1.58 mm—60 mm4 mm100 mm2$25.2
2DBE 030 700 S04D3*R1.5*8FL*70NL*100 OAL*4SH*2F3 mmR1.58 mm—70 mm4 mm100 mm2$27.8
2DBE 040 040 060D4*R2*4FL*60 OAL*4SH*2F4 mmR24 mm——4 mm60 mm2$12.8
2DBE 040 160 060D4*R2*16FL*60 OAL*4SH*2F4 mmR216 mm——4 mm60 mm2$12.8
2DBE 040 160 080D4*R2*16FL*80 OAL*4SH*2F4 mmR216 mm——4 mm80 mm2$14
2DBE 040 160 100D4*R2*16FL*100 OAL*4SH*2F4 mmR216 mm——4 mm100 mm2$15.2
2DBE 040 160 130D4*R2*16FL*130 OAL*4SH*2F4 mmR216 mm——4 mm130 mm2$17.8
2DBE 040 160 150D4*R2*16FL*150 OAL*4SH*2F4 mmR216 mm——4 mm150 mm2$19.4
2DBE 040 300 080D4*R2*16FL*30NL*80 OAL*4SH*2F4 mmR216 mm—30 mm4 mm80 mm2$15.6
2DBE 040 400 100D4*R2*16FL*40NL*100 OAL*4SH*2F4 mmR216 mm—40 mm4 mm100 mm2$19.6
2DBE 040 400 130D4*R2*16FL*40NL*130 OAL*4SH*2F4 mmR216 mm—40 mm4 mm130 mm2$22.2
2DBE 040 500 150D4*R2*16FL*50NL*150 OAL*4SH*2F4 mmR216 mm—50 mm4 mm150 mm2$26.6
2DBE 050 160 110D5*R2.5*16FL*110 OAL*5SH*2F5 mmR2.516 mm——5 mm110 mm2$23.6
2DBE 050 200 S06D5*R2.5*16FL*20NL*110 OAL*6SH*2F5 mmR2.516 mm—20 mm6 mm110 mm2$27.8
2DBE 050 400 110D5*R2.5*16FL*40NL*110 OAL*5SH*2F5 mmR2.516 mm—40 mm5 mm110 mm2$26.4
2DBE 050 400 S06D5*R2.5*16FL*40NL*110 OAL*6SH*2F5 mmR2.516 mm—40 mm6 mm110 mm2$30.4
2DBE 050 600 S06D5*R2.5*16FL*60NL*110 OAL*6SH*2F5 mmR2.516 mm—60 mm6 mm110 mm2$36
2DBE 060 100 060D6*R3*10FL*60 OAL*6SH*2F6 mmR310 mm——6 mm60 mm2$22.6
2DBE 060 250 080D6*R3*16FL*25NL*80 OAL*6SH*2F6 mmR316 mm—25 mm6 mm80 mm2$25
2DBE 060 250 110D6*R3*16FL*25NL*110 OAL*6SH*2F6 mmR316 mm—25 mm6 mm110 mm2$29.4
2DBE 060 300 150D6*R3*16FL*30NL*150 OAL*6SH*2F6 mmR316 mm—30 mm6 mm150 mm2$36.4
2DBE 060 400 110D6*R3*16FL*40NL*110 OAL*6SH*2F6 mmR316 mm—40 mm6 mm110 mm2$30.4
2DBE 060 500 150D6*R3*16FL*50NL*150 OAL*6SH*2F6 mmR316 mm—50 mm6 mm150 mm2$40.2
2DBE 080 300 080D8*R4*20FL*30NL*80 OAL*8SH*2F8 mmR420 mm—30 mm8 mm80 mm2$35.8
2DBE 080 300 110D8*R4*20FL*30NL*110 OAL*8SH*2F8 mmR420 mm—30 mm8 mm110 mm2$42.8
2DBE 080 400 110D8*R4*20FL*40NL*110 OAL*8SH*2F8 mmR420 mm—40 mm8 mm110 mm2$42.8
2DBE 080 400 200D8*R4*20FL*40NL*200 OAL*8SH*2F8 mmR420 mm—40 mm8 mm200 mm2$67
2DBE 080 500 150D8*R4*20FL*50NL*150 OAL*8SH*2F8 mmR420 mm—50 mm8 mm150 mm2$54.2
2DBE 100 400 080D10*R5*22FL*40NL*80 OAL*10SH*2F10 mmR522 mm—40 mm10 mm80 mm2$50.8
2DBE 100 400 110D10*R5*22FL*40NL*110 OAL*10SH*2F10 mmR522 mm—40 mm10 mm110 mm2$61.8
2DBE 100 500 110D10*R5*22FL*50NL*110 OAL*10SH*2F10 mmR522 mm—50 mm10 mm110 mm2$61.8
2DBE 100 500 200D10*R5*22FL*50NL*200 OAL*10SH*2F10 mmR522 mm—50 mm10 mm200 mm2$98.6
2DBE 100 600 160D10*R5*22FL*60NL*160 OAL*10SH*2F10 mmR522 mm—60 mm10 mm160 mm2$82.2
2DBE 120 500 110D12*R6*25FL*50NL*110 OAL*12SH*2F12 mmR625 mm—50 mm12 mm110 mm2$80.8
2DBE 120 500 160D12*R6*25FL*50NL*160 OAL*12SH*2F12 mmR625 mm—50 mm12 mm160 mm2$108.4
2DBE 120 600 200D12*R6*25FL*60NL*200 OAL*12SH*2F12 mmR625 mm—60 mm12 mm200 mm2$130.4
3 Flute Diamond Coated Ball End Mills for Graphite technical drawing and product view
3DBE · Ball nose

3 Flute Diamond Coated Ball End Mills for Graphite

Balanced chip evacuation, rigidity, and finish in 3D electrode work.

Diamond coatingBall noseStandard reach3 flutes
Diameter range
Ø1–12 mm
Standard sizes
59 SKUs
USD price range
$12.80–$130.40 / pc
View all 59 3DBE sizes and prices
Order code / SKUSpecificationDiameterRadiusFlute lengthNeck ØNeck lengthShank ØOverall lengthFlutesUSD / pc
3DBE 010 030 S04D1*R0.5*3FL*60 OAL*4SH*3F1 mmR0.53 mm——4 mm60 mm3$12.8
3DBE 010 050 S04D1*R0.5*3FL*5NL*60 OAL*4SH*3F1 mmR0.53 mm—5 mm4 mm60 mm3$12.8
3DBE 010 100 S04D1*R0.5*3FL*10NL*60 OAL*4SH*3F1 mmR0.53 mm—10 mm4 mm60 mm3$12.8
3DBE 010 150 S04D1*R0.5*3FL*15NL*60 OAL*4SH*3F1 mmR0.53 mm—15 mm4 mm60 mm3$12.8
3DBE 010 200 S04D1*R0.5*3FL*20NL*60 OAL*4SH*3F1 mmR0.53 mm—20 mm4 mm60 mm3$12.8
3DBE 010 250 S04D1*R0.5*3FL*25NL*80 OAL*4SH*3F1 mmR0.53 mm—25 mm4 mm80 mm3$14.2
3DBE 010 300 S04D1*R0.5*3FL*30NL*80 OAL*4SH*3F1 mmR0.53 mm—30 mm4 mm80 mm3$15.6
3DBE 010 350 S04D1*R0.5*3FL*35NL*80 OAL*4SH*3F1 mmR0.53 mm—35 mm4 mm80 mm3$17
3DBE 010 400 S04D1*R0.5*3FL*40NL*80 OAL*4SH*3F1 mmR0.53 mm—40 mm4 mm80 mm3$18.4
3DBE 010 450 S04D1*R0.5*3FL*45NL*80 OAL*4SH*3F1 mmR0.53 mm—45 mm4 mm80 mm3$19.8
3DBE 010 500 S04D1*R0.5*3FL*50NL*80 OAL*4SH*3F1 mmR0.53 mm—50 mm4 mm80 mm3$21.2
3DBE 015 045 S04D1.5*R0.75*4.5FL*60 OAL*4SH*3F1.5 mmR0.754.5 mm——4 mm60 mm3$12.8
3DBE 015 100 S04D1.5*R0.75*4.5FL*10NL*80 OAL*4SH*3F1.5 mmR0.754.5 mm—10 mm4 mm80 mm3$14
3DBE 015 150 S04D1.5*R0.75*4.5FL*15NL*80 OAL*4SH*3F1.5 mmR0.754.5 mm—15 mm4 mm80 mm3$14
3DBE 015 200 S04D1.5*R0.75*4.5FL*20NL*80 OAL*4SH*3F1.5 mmR0.754.5 mm—20 mm4 mm80 mm3$14
3DBE 015 250 S04D1.5*R0.75*4.5FL*25NL*80 OAL*4SH*3F1.5 mmR0.754.5 mm—25 mm4 mm80 mm3$14.2
3DBE 015 300 S04D1.5*R0.75*4.5FL*30NL*80 OAL*4SH*3F1.5 mmR0.754.5 mm—30 mm4 mm80 mm3$15.6
3DBE 015 350 S04D1.5*R0.75*4.5FL*35NL*80 OAL*4SH*3F1.5 mmR0.754.5 mm—35 mm4 mm80 mm3$17
3DBE 015 400 S04D1.5*R0.75*4.5FL*40NL*80 OAL*4SH*3F1.5 mmR0.754.5 mm—40 mm4 mm80 mm3$18.4
3DBE 015 450 S04D1.5*R0.75*4.5FL*45NL*80 OAL*4SH*3F1.5 mmR0.754.5 mm—45 mm4 mm80 mm3$19.8
3DBE 015 500 S04D1.5*R0.75*4.5FL*50NL*80 OAL*4SH*3F1.5 mmR0.754.5 mm—50 mm4 mm80 mm3$21.2
3DBE 020 060 S04D2*R1*6FL*60 OAL*4SH*3F2 mmR16 mm——4 mm60 mm3$12.8
3DBE 020 100 S04D2*R1*6FL*10NL*80 OAL*4SH*3F2 mmR16 mm—10 mm4 mm80 mm3$14
3DBE 020 150 S04D2*R1*6FL*15NL*80 OAL*4SH*3F2 mmR16 mm—15 mm4 mm80 mm3$14
3DBE 020 200 S04D2*R1*6FL*20NL*80 OAL*4SH*3F2 mmR16 mm—20 mm4 mm80 mm3$14
3DBE 020 250 S04D2*R1*6FL*25NL*80 OAL*4SH*3F2 mmR16 mm—25 mm4 mm80 mm3$14.2
3DBE 020 300 S04D2*R1*6FL*30NL*80 OAL*4SH*3F2 mmR16 mm—30 mm4 mm80 mm3$15.6
3DBE 020 350 S04D2*R1*6FL*35NL*80 OAL*4SH*3F2 mmR16 mm—35 mm4 mm80 mm3$17
3DBE 020 400 S04D2*R1*6FL*40NL*100 OAL*4SH*3F2 mmR16 mm—40 mm4 mm100 mm3$19.6
3DBE 020 500 S04D2*R1*6FL*50NL*100 OAL*4SH*3F2 mmR16 mm—50 mm4 mm100 mm3$22.4
3DBE 020 600 S04D2*R1*6FL*60NL*100 OAL*4SH*3F2 mmR16 mm—60 mm4 mm100 mm3$25.2
3DBE 020 700 S04D2*R1*6FL*70NL*100 OAL*4SH*3F2 mmR16 mm—70 mm4 mm100 mm3$27.8
3DBE 030 080 S04D3*R1.5*8FL*60 OAL*4SH*3F3 mmR1.58 mm——4 mm60 mm3$12.8
3DBE 030 150 100D3*R1.5*8FL*15NL*100 OAL*3SH*3F3 mmR1.58 mm—15 mm3 mm100 mm3$12.8
3DBE 030 150 S04D3*R1.5*8FL*15NL*100 OAL*4SH*3F3 mmR1.58 mm—15 mm4 mm100 mm3$15.2
3DBE 030 200 S04D3*R1.5*8FL*20NL*100 OAL*4SH*3F3 mmR1.58 mm—20 mm4 mm100 mm3$15.2
3DBE 030 300 S04D3*R1.5*8FL*30NL*100 OAL*4SH*3F3 mmR1.58 mm—30 mm4 mm100 mm3$16.8
3DBE 030 400 S04D3*R1.5*8FL*40NL*100 OAL*4SH*3F3 mmR1.58 mm—40 mm4 mm100 mm3$19.6
3DBE 030 500 S04D3*R1.5*8FL*50NL*100 OAL*4SH*3F3 mmR1.58 mm—50 mm4 mm100 mm3$22.4
3DBE 040 160 080D4*R2*16FL*80 OAL*4SH*3F4 mmR216 mm——4 mm80 mm3$14
3DBE 040 160 100D4*R2*16FL*100 OAL*4SH*3F4 mmR216 mm——4 mm100 mm3$15.2
3DBE 040 160 130D4*R2*16FL*130 OAL*4SH*3F4 mmR216 mm——4 mm130 mm3$17.8
3DBE 040 300 080D4*R2*16FL*30NL*80 OAL*4SH*3F4 mmR216 mm—30 mm4 mm80 mm3$15.6
3DBE 040 400 100D4*R2*16FL*40NL*100 OAL*4SH*3F4 mmR216 mm—40 mm4 mm100 mm3$19.6
3DBE 040 400 130D4*R2*16FL*40NL*130 OAL*4SH*3F4 mmR216 mm—40 mm4 mm130 mm3$22.2
3DBE 050 160 110D5*R2.5*16FL*110 OAL*5SH*3F5 mmR2.516 mm——5 mm110 mm3$23.6
3DBE 050 400 110D5*R2.5*16FL*40NL*110 OAL*5SH*3F5 mmR2.516 mm—40 mm5 mm110 mm3$26.4
3DBE 060 250 110D6*R3*16FL*25NL*110 OAL*6SH*3F6 mmR316 mm—25 mm6 mm110 mm3$29.4
3DBE 060 300 150D6*R3*16FL*30NL*150 OAL*6SH*3F6 mmR316 mm—30 mm6 mm150 mm3$36.4
3DBE 060 400 110D6*R3*16FL*40NL*110 OAL*6SH*3F6 mmR316 mm—40 mm6 mm110 mm3$30.4
3DBE 060 500 150D6*R3*16FL*50NL*150 OAL*6SH*3F6 mmR316 mm—50 mm6 mm150 mm3$40.2
3DBE 060 500 180D6*R3*16FL*50NL*180 OAL*6SH*3F6 mmR316 mm—50 mm6 mm180 mm3$45.6
3DBE 080 400 110D8*R4*20FL*40NL*110 OAL*8SH*3F8 mmR420 mm—40 mm8 mm110 mm3$42.8
3DBE 080 500 150D8*R4*20FL*50NL*150 OAL*8SH*3F8 mmR420 mm—50 mm8 mm150 mm3$54.2
3DBE 100 400 110D10*R5*22FL*40NL*110 OAL*10SH*3F10 mmR522 mm—40 mm10 mm110 mm3$61.8
3DBE 100 600 160D10*R5*22FL*60NL*160 OAL*10SH*3F10 mmR522 mm—60 mm10 mm160 mm3$82.2
3DBE 120 500 110D12*R6*25FL*50NL*110 OAL*12SH*3F12 mmR625 mm—50 mm12 mm110 mm3$80.8
3DBE 120 500 160D12*R6*25FL*50NL*160 OAL*12SH*3F12 mmR625 mm—50 mm12 mm160 mm3$108.4
3DBE 120 600 200D12*R6*25FL*60NL*200 OAL*12SH*3F12 mmR625 mm—60 mm12 mm200 mm3$130.4
3 Flute Diamond Coated Taper Neck Ball End Mills for Graphite technical drawing and product view
3TBD · Ball nose

3 Flute Diamond Coated Taper Neck Ball End Mills for Graphite

Small-diameter deep-cavity finishing with added neck support.

Diamond coatingBall noseTaper neck3 flutes
Diameter range
Ø1–4 mm
Standard sizes
26 SKUs
USD price range
$16.80–$54.00 / pc
View all 26 3TBD sizes and prices
Order code / SKUSpecificationDiameterRadiusFlute lengthNeck ØNeck lengthShank ØOverall lengthFlutesUSD / pc
3TBD 010 003 300D1*R0.5*3FL*30NL*100 OAL*4SH*3F1 mmR0.53 mm—30 mm4 mm100 mm3$16.8
3TBD 010 003 400D1*R0.5*3FL*40NL*100 OAL*4SH*3F1 mmR0.53 mm—40 mm4 mm100 mm3$19.6
3TBD 010 003 500D1*R0.5*3FL*50NL*100 OAL*4SH*3F1 mmR0.53 mm—50 mm4 mm100 mm3$22.4
3TBD 010 010 300D1*R0.5*3FL*30NL*100 OAL*4SH*3F1 mmR0.53 mm—30 mm4 mm100 mm3$16.8
3TBD 010 010 400D1*R0.5*3FL*40NL*100 OAL*4SH*3F1 mmR0.53 mm—40 mm4 mm100 mm3$19.6
3TBD 010 010 500D1*R0.5*3FL*50NL*100 OAL*4SH*3F1 mmR0.53 mm—50 mm4 mm100 mm3$22.4
3TBD 010 010 600D1*R0.5*3FL*60NL*100 OAL*4SH*3F1 mmR0.53 mm—60 mm4 mm100 mm3$25.2
3TBD 015 003 300D1.5*R0.75*4FL*30NL*100 OAL*4SH*3F1.5 mmR0.754 mm—30 mm4 mm100 mm3$16.8
3TBD 015 003 400D1.5*R0.75*4FL*40NL*100 OAL*4SH*3F1.5 mmR0.754 mm—40 mm4 mm100 mm3$19.6
3TBD 015 003 500D1.5*R0.75*4FL*50NL*100 OAL*4SH*3F1.5 mmR0.754 mm—50 mm4 mm100 mm3$22.4
3TBD 015 010 400D1.5*R0.75*4FL*40NL*100 OAL*4SH*3F1.5 mmR0.754 mm—40 mm4 mm100 mm3$19.6
3TBD 015 010 500D1.5*R0.75*4FL*50NL*100 OAL*4SH*3F1.5 mmR0.754 mm—50 mm4 mm100 mm3$22.4
3TBD 015 010 600D1.5*R0.75*4FL*60NL*100 OAL*4SH*3F1.5 mmR0.754 mm—60 mm4 mm100 mm3$25.2
3TBD 020 003 400D2*R1*5FL*40NL*130 OAL*4SH*3F2 mmR15 mm—40 mm4 mm130 mm3$22.2
3TBD 020 003 500D2*R1*5FL*50NL*130 OAL*4SH*3F2 mmR15 mm—50 mm4 mm130 mm3$24.8
3TBD 020 003 600D2*R1*5FL*60NL*130 OAL*4SH*3F2 mmR15 mm—60 mm4 mm130 mm3$27.6
3TBD 020 010 500D2*R1*5FL*50NL*130 OAL*4SH*3F2 mmR15 mm—50 mm4 mm130 mm3$24.8
3TBD 020 010 600D2*R1*5FL*60NL*130 OAL*4SH*3F2 mmR15 mm—60 mm4 mm130 mm3$27.6
3TBD 020 010 700D2*R1*5FL*70NL*130 OAL*4SH*3F2 mmR15 mm—70 mm4 mm130 mm3$30.4
3TBD 030 003 600D3*R1.5*6FL*60NL*150 OAL*6SH*3F3 mmR1.56 mm—60 mm6 mm150 mm3$43
3TBD 030 003 800D3*R1.5*6FL*80NL*150 OAL*6SH*3F3 mmR1.56 mm—80 mm6 mm150 mm3$48.6
3TBD 030 010 700D3*R1.5*6FL*70NL*150 OAL*6SH*3F3 mmR1.56 mm—70 mm6 mm150 mm3$45.8
3TBD 030 010 900D3*R1.5*6FL*90NL*150 OAL*6SH*3F3 mmR1.56 mm—90 mm6 mm150 mm3$51.4
3TBD 040 003 1000D4*R2*8FL*100NL*150 OAL*6SH*3F4 mmR28 mm—100 mm6 mm150 mm3$54
3TBD 040 003 800D4*R2*8FL*80NL*150 OAL*6SH*3F4 mmR28 mm—80 mm6 mm150 mm3$48.6
3TBD 040 010 650D4*R2*8FL*65NL*150 OAL*6SH*3F4 mmR28 mm—65 mm6 mm150 mm3$44.4
4 Flute Diamond Coated Ball End Mills for Graphite technical drawing and product view
4DBE · Ball nose

4 Flute Diamond Coated Ball End Mills for Graphite

High-feed finishing and smooth 3D surfaces in rigid CNC setups.

Diamond coatingBall noseStandard reach4 flutes
Diameter range
Ø1–12 mm
Standard sizes
55 SKUs
USD price range
$12.80–$130.40 / pc
View all 55 4DBE sizes and prices
Order code / SKUSpecificationDiameterRadiusFlute lengthNeck ØNeck lengthShank ØOverall lengthFlutesUSD / pc
4DBE 010 030 S04D1*R0.5*3FL*60 OAL*4SH*4F1 mmR0.53 mm——4 mm60 mm4$12.8
4DBE 010 050 S04D1*R0.5*3FL*5NL*60 OAL*4SH*4F1 mmR0.53 mm—5 mm4 mm60 mm4$12.8
4DBE 010 100 S04D1*R0.5*3FL*10NL*60 OAL*4SH*4F1 mmR0.53 mm—10 mm4 mm60 mm4$12.8
4DBE 010 150 S04D1*R0.5*3FL*15NL*60 OAL*4SH*4F1 mmR0.53 mm—15 mm4 mm60 mm4$12.8
4DBE 010 200 S04D1*R0.5*3FL*20NL*60 OAL*4SH*4F1 mmR0.53 mm—20 mm4 mm60 mm4$12.8
4DBE 010 250 S04D1*R0.5*3FL*25NL*60 OAL*4SH*4F1 mmR0.53 mm—25 mm4 mm60 mm4$13
4DBE 010 300 S04D1*R0.5*3FL*30NL*80 OAL*4SH*4F1 mmR0.53 mm—30 mm4 mm80 mm4$15.6
4DBE 010 350 S04D1*R0.5*3FL*35NL*80 OAL*4SH*4F1 mmR0.53 mm—35 mm4 mm80 mm4$17
4DBE 010 400 S04D1*R0.5*3FL*40NL*80 OAL*4SH*4F1 mmR0.53 mm—40 mm4 mm80 mm4$18.4
4DBE 010 450 S04D1*R0.5*3FL*45NL*80 OAL*4SH*4F1 mmR0.53 mm—45 mm4 mm80 mm4$19.8
4DBE 010 500 S04D1*R0.5*3FL*50NL*80 OAL*4SH*4F1 mmR0.53 mm—50 mm4 mm80 mm4$21.2
4DBE 015 045 S04D1.5*R0.75*4.5FL*60 OAL*4SH*4F1.5 mmR0.754.5 mm——4 mm60 mm4$12.8
4DBE 015 100 S04D1.5*R0.75*4.5FL*10NL*60 OAL*4SH*4F1.5 mmR0.754.5 mm—10 mm4 mm60 mm4$12.8
4DBE 015 150 S04D1.5*R0.75*4.5FL*15NL*60 OAL*4SH*4F1.5 mmR0.754.5 mm—15 mm4 mm60 mm4$12.8
4DBE 015 200 S04D1.5*R0.75*4.5FL*20NL*60 OAL*4SH*4F1.5 mmR0.754.5 mm—20 mm4 mm60 mm4$12.8
4DBE 015 250 S04D1.5*R0.75*4.5FL*25NL*60 OAL*4SH*4F1.5 mmR0.754.5 mm—25 mm4 mm60 mm4$13
4DBE 015 300 S04D1.5*R0.75*4.5FL*30NL*80 OAL*4SH*4F1.5 mmR0.754.5 mm—30 mm4 mm80 mm4$15.6
4DBE 015 350 S04D1.5*R0.75*4.5FL*35NL*80 OAL*4SH*4F1.5 mmR0.754.5 mm—35 mm4 mm80 mm4$17
4DBE 015 400 S04D1.5*R0.75*4.5FL*40NL*80 OAL*4SH*4F1.5 mmR0.754.5 mm—40 mm4 mm80 mm4$18.4
4DBE 015 450 S04D1.5*R0.75*4.5FL*45NL*80 OAL*4SH*4F1.5 mmR0.754.5 mm—45 mm4 mm80 mm4$19.8
4DBE 015 500 S04D1.5*R0.75*4.5FL*50NL*80 OAL*4SH*4F1.5 mmR0.754.5 mm—50 mm4 mm80 mm4$21.2
4DBE 020 060 S04D2*R1*6FL*60 OAL*4SH*4F2 mmR16 mm——4 mm60 mm4$12.8
4DBE 020 100 S04D2*R1*6FL*10NL*80 OAL*4SH*4F2 mmR16 mm—10 mm4 mm80 mm4$14
4DBE 020 200 S04D2*R1*6FL*20NL*80 OAL*4SH*4F2 mmR16 mm—20 mm4 mm80 mm4$14
4DBE 020 300 S04D2*R1*6FL*30NL*80 OAL*4SH*4F2 mmR16 mm—30 mm4 mm80 mm4$15.6
4DBE 020 400 S04D2*R1*6FL*40NL*80 OAL*4SH*4F2 mmR16 mm—40 mm4 mm80 mm4$18.4
4DBE 020 500 S04D2*R1*6FL*50NL*100 OAL*4SH*4F2 mmR16 mm—50 mm4 mm100 mm4$22.4
4DBE 020 600 S04D2*R1*6FL*60NL*100 OAL*4SH*4F2 mmR16 mm—60 mm4 mm100 mm4$25.2
4DBE 020 700 S04D2*R1*6FL*70NL*100 OAL*4SH*4F2 mmR16 mm—70 mm4 mm100 mm4$27.8
4DBE 030 080 S04D3*R1.5*8FL*60 OAL*4SH*4F3 mmR1.58 mm——4 mm60 mm4$12.8
4DBE 030 150 S04D3*R1.5*8FL*15NL*100 OAL*4SH*4F3 mmR1.58 mm—15 mm4 mm100 mm4$15.2
4DBE 030 200 S04D3*R1.5*8FL*20NL*100 OAL*4SH*4F3 mmR1.58 mm—20 mm4 mm100 mm4$15.2
4DBE 030 300 S04D3*R1.5*8FL*30NL*100 OAL*4SH*4F3 mmR1.58 mm—30 mm4 mm100 mm4$16.8
4DBE 030 400 S04D3*R1.5*8FL*40NL*100 OAL*4SH*4F3 mmR1.58 mm—40 mm4 mm100 mm4$19.6
4DBE 030 500 S04D3*R1.5*8FL*50NL*100 OAL*4SH*4F3 mmR1.58 mm—50 mm4 mm100 mm4$22.4
4DBE 030 600 S04D3*R1.5*8FL*60NL*100 OAL*4SH*4F3 mmR1.58 mm—60 mm4 mm100 mm4$25.2
4DBE 030 700 S04D3*R1.5*8FL*70NL*100 OAL*4SH*4F3 mmR1.58 mm—70 mm4 mm100 mm4$27.8
4DBE 040 160 060D4*R2*16FL*60 OAL*4SH*4F4 mmR216 mm——4 mm60 mm4$12.8
4DBE 040 160 080D4*R2*16FL*80 OAL*4SH*4F4 mmR216 mm——4 mm80 mm4$14
4DBE 040 160 100D4*R2*16FL*100 OAL*4SH*4F4 mmR216 mm——4 mm100 mm4$15.2
4DBE 040 160 130D4*R2*16FL*130 OAL*4SH*4F4 mmR216 mm——4 mm130 mm4$17.8
4DBE 060 250 080D6*R3*16FL*25NL*80 OAL*6SH*4F6 mmR316 mm—25 mm6 mm80 mm4$25
4DBE 060 250 110D6*R3*16FL*25NL*110 OAL*6SH*4F6 mmR316 mm—25 mm6 mm110 mm4$29.4
4DBE 060 300 150D6*R3*16FL*30NL*150 OAL*6SH*4F6 mmR316 mm—30 mm6 mm150 mm4$36.4
4DBE 080 300 080D8*R4*20FL*30NL*80 OAL*8SH*4F8 mmR420 mm—30 mm8 mm80 mm4$35.8
4DBE 080 300 110D8*R4*20FL*30NL*110 OAL*8SH*4F8 mmR420 mm—30 mm8 mm110 mm4$42.8
4DBE 080 350 150D8*R4*20FL*35NL*150 OAL*8SH*4F8 mmR420 mm—35 mm8 mm150 mm4$53.6
4DBE 080 400 200D8*R4*20FL*40NL*200 OAL*8SH*4F8 mmR420 mm—40 mm8 mm200 mm4$67
4DBE 100 350 080D10*R5*22FL*35NL*80 OAL*10SH*4F10 mmR522 mm—35 mm10 mm80 mm4$50.8
4DBE 100 350 110D10*R5*22FL*35NL*110 OAL*10SH*4F10 mmR522 mm—35 mm10 mm110 mm4$61.8
4DBE 100 400 160D10*R5*22FL*40NL*160 OAL*10SH*4F10 mmR522 mm—40 mm10 mm160 mm4$82.2
4DBE 100 500 200D10*R5*22FL*50NL*200 OAL*10SH*4F10 mmR522 mm—50 mm10 mm200 mm4$98.6
4DBE 120 500 110D12*R6*25FL*50NL*110 OAL*12SH*4F12 mmR625 mm—50 mm12 mm110 mm4$80.8
4DBE 120 500 160D12*R6*25FL*50NL*160 OAL*12SH*4F12 mmR625 mm—50 mm12 mm160 mm4$108.4
4DBE 120 600 200D12*R6*25FL*60NL*200 OAL*12SH*4F12 mmR625 mm—60 mm12 mm200 mm4$130.4
2 Flute Diamond Coated Square End Mills for Graphite technical drawing and product view
2DEM · Square end

2 Flute Diamond Coated Square End Mills for Graphite

Plunge-capable slots, pockets, edges, and roughing with open chip space.

Diamond coatingSquare endStandard reach2 flutes
Diameter range
Ø0.2–12 mm
Standard sizes
63 SKUs
USD price range
$11.80–$108.40 / pc
View all 63 2DEM sizes and prices
Order code / SKUSpecificationDiameterRadiusFlute lengthNeck ØNeck lengthShank ØOverall lengthFlutesUSD / pc
2DEM 002 004 S04D0.2*0.4FL*45 OAL*4SH*2F0.2 mm—0.4 mm——4 mm45 mm2$13
2DEM 003 006 S04D0.3*0.6FL*45 OAL*4SH*2F0.3 mm—0.6 mm——4 mm45 mm2$13
2DEM 003 020 S04D0.3*0.6FL*2NL*45 OAL*4SH*2F0.3 mm—0.6 mm—2 mm4 mm45 mm2$13
2DEM 003 040 S04D0.3*0.6FL*4NL*45 OAL*4SH*2F0.3 mm—0.6 mm—4 mm4 mm45 mm2$13
2DEM 004 008 S04D0.4*0.8FL*45 OAL*4SH*2F0.4 mm—0.8 mm——4 mm45 mm2$13
2DEM 004 020 S04D0.4*0.8FL*2NL*45 OAL*4SH*2F0.4 mm—0.8 mm—2 mm4 mm45 mm2$13
2DEM 004 040 S04D0.4*0.8FL*4NL*45 OAL*4SH*2F0.4 mm—0.8 mm—4 mm4 mm45 mm2$13
2DEM 005 010 S04D0.5*1FL*45 OAL*4SH*2F0.5 mm—1 mm——4 mm45 mm2$13
2DEM 005 030 S04D0.5*1FL*3NL*45 OAL*4SH*2F0.5 mm—1 mm—3 mm4 mm45 mm2$13
2DEM 005 050 S04D0.5*1FL*5NL*45 OAL*4SH*2F0.5 mm—1 mm—5 mm4 mm45 mm2$13
2DEM 006 012 S04D0.6*1.2FL*45 OAL*4SH*2F0.6 mm—1.2 mm——4 mm45 mm2$13
2DEM 006 030 S04D0.6*1.2FL*3NL*45 OAL*4SH*2F0.6 mm—1.2 mm—3 mm4 mm45 mm2$13
2DEM 006 050 S04D0.6*1.2FL*5NL*45 OAL*4SH*2F0.6 mm—1.2 mm—5 mm4 mm45 mm2$13
2DEM 007 015 S04D0.7*1.5FL*45 OAL*4SH*2F0.7 mm—1.5 mm——4 mm45 mm2$13
2DEM 007 040 S04D0.7*1.5FL*4NL*45 OAL*4SH*2F0.7 mm—1.5 mm—4 mm4 mm45 mm2$13
2DEM 007 060 S04D0.7*1.5FL*6NL*45 OAL*4SH*2F0.7 mm—1.5 mm—6 mm4 mm45 mm2$13
2DEM 007 080 S04D0.7*1.5FL*8NL*45 OAL*4SH*2F0.7 mm—1.5 mm—8 mm4 mm45 mm2$13
2DEM 008 020 S04D0.8*2FL*45 OAL*4SH*2F0.8 mm—2 mm——4 mm45 mm2$13
2DEM 009 025 S04D0.9*2.5FL*45 OAL*4SH*2F0.9 mm—2.5 mm——4 mm45 mm2$13
2DEM 010 030 045D1*3FL*45 OAL*4SH*2F1 mm—3 mm——4 mm45 mm2$11.8
2DEM 010 030 S04D1*3FL*60 OAL*4SH*2F1 mm—3 mm——4 mm60 mm2$12.8
2DEM 010 050 S04D1*3FL*5NL*60 OAL*4SH*2F1 mm—3 mm—5 mm4 mm60 mm2$12.8
2DEM 010 100 S04D1*3FL*10NL*60 OAL*4SH*2F1 mm—3 mm—10 mm4 mm60 mm2$12.8
2DEM 010 150 S04D1*3FL*15NL*60 OAL*4SH*2F1 mm—3 mm—15 mm4 mm60 mm2$12.8
2DEM 010 200 S04D1*3FL*20NL*60 OAL*4SH*2F1 mm—3 mm—20 mm4 mm60 mm2$12.8
2DEM 010 250 S04D1*3FL*25NL*60 OAL*4SH*2F1 mm—3 mm—25 mm4 mm60 mm2$13
2DEM 010 300 S04D1*3FL*30NL*60 OAL*4SH*2F1 mm—3 mm—30 mm4 mm60 mm2$14.4
2DEM 015 060 S04D1.5*6FL*60 OAL*4SH*2F1.5 mm—6 mm——4 mm60 mm2$12.8
2DEM 015 100 S04D1.5*6FL*10NL*60 OAL*4SH*2F1.5 mm—6 mm—10 mm4 mm60 mm2$12.8
2DEM 015 150 S04D1.5*6FL*15NL*60 OAL*4SH*2F1.5 mm—6 mm—15 mm4 mm60 mm2$12.8
2DEM 015 200 S04D1.5*6FL*20NL*60 OAL*4SH*2F1.5 mm—6 mm—20 mm4 mm60 mm2$12.8
2DEM 015 250 S04D1.5*6FL*25NL*60 OAL*4SH*2F1.5 mm—6 mm—25 mm4 mm60 mm2$13
2DEM 015 300 S04D1.5*6FL*30NL*60 OAL*4SH*2F1.5 mm—6 mm—30 mm4 mm60 mm2$14.4
2DEM 020 060 S04D2*6FL*45 OAL*4SH*2F2 mm—6 mm——4 mm45 mm2$11.8
2DEM 020 080 S04D2*8FL*80 OAL*4SH*2F2 mm—8 mm——4 mm80 mm2$14
2DEM 020 120 S04D2*8FL*12NL*80 OAL*4SH*2F2 mm—8 mm—12 mm4 mm80 mm2$14
2DEM 020 150 S04D2*8FL*15NL*80 OAL*4SH*2F2 mm—8 mm—15 mm4 mm80 mm2$14
2DEM 020 200 S04D2*8FL*20NL*80 OAL*4SH*2F2 mm—8 mm—20 mm4 mm80 mm2$14
2DEM 020 250 S04D2*8FL*25NL*80 OAL*4SH*2F2 mm—8 mm—25 mm4 mm80 mm2$14.2
2DEM 020 300 S04D2*8FL*30NL*80 OAL*4SH*2F2 mm—8 mm—30 mm4 mm80 mm2$15.6
2DEM 020 400 S04D2*8FL*40NL*80 OAL*4SH*2F2 mm—8 mm—40 mm4 mm80 mm2$18.4
2DEM 020 450 S04D2*8FL*45NL*80 OAL*4SH*2F2 mm—8 mm—45 mm4 mm80 mm2$19.8
2DEM 020 500 S04D2*8FL*50NL*80 OAL*4SH*2F2 mm—8 mm—50 mm4 mm80 mm2$21.2
2DEM 030 090 S06D3*9FL*50 OAL*6SH*2F3 mm—9 mm——6 mm50 mm2$18
2DEM 030 120 S04D3*12FL*80 OAL*4SH*2F3 mm—12 mm——4 mm80 mm2$14
2DEM 030 200 S04D3*12FL*20NL*80 OAL*4SH*2F3 mm—12 mm—20 mm4 mm80 mm2$14
2DEM 030 250 S04D3*12FL*25NL*80 OAL*4SH*2F3 mm—12 mm—25 mm4 mm80 mm2$14.2
2DEM 030 300 S04D3*12FL*30NL*80 OAL*4SH*2F3 mm—12 mm—30 mm4 mm80 mm2$15.6
2DEM 030 400 S04D3*12FL*40NL*80 OAL*4SH*2F3 mm—12 mm—40 mm4 mm80 mm2$18.4
2DEM 030 500 S04D3*12FL*50NL*80 OAL*4SH*2F3 mm—12 mm—50 mm4 mm80 mm2$21.2
2DEM 040 120 S06D4*12FL*50 OAL*6SH*2F4 mm—12 mm——6 mm50 mm2$18
2DEM 040 160 080D4*16FL*80 OAL*4SH*2F4 mm—16 mm——4 mm80 mm2$14
2DEM 050 150 S06D5*15FL*60 OAL*6SH*2F5 mm—15 mm——6 mm60 mm2$20.8
2DEM 050 200 S06D5*20FL*110 OAL*6SH*2F5 mm—20 mm——6 mm110 mm2$27.8
2DEM 060 180 S06D6*18FL*60 OAL*6SH*2F6 mm—18 mm——6 mm60 mm2$22.6
2DEM 060 250 110D6*25FL*110 OAL*6SH*2F6 mm—25 mm——6 mm110 mm2$29.4
2DEM 060 250 150D6*25FL*150 OAL*6SH*2F6 mm—25 mm——6 mm150 mm2$36.4
2DEM 080 240 S08D8*24FL*70 OAL*8SH*2F8 mm—24 mm——8 mm70 mm2$33.6
2DEM 080 400 150D8*25FL*40NL*150 OAL*8SH*2F8 mm—25 mm—40 mm8 mm150 mm2$53.6
2DEM 100 250 S10D10*25FL*80 OAL*10SH*2F10 mm—25 mm——10 mm80 mm2$50.8
2DEM 100 500 160D10*25FL*50NL*160 OAL*10SH*2F10 mm—25 mm—50 mm10 mm160 mm2$82.2
2DEM 120 250 S12D12*25FL*80 OAL*12SH*2F12 mm—25 mm——12 mm80 mm2$65.6
2DEM 120 600 160D12*25FL*60NL*160 OAL*12SH*2F12 mm—25 mm—60 mm12 mm160 mm2$108.4
3 Flute Diamond Coated Square End Mills for Graphite technical drawing and product view
3DEM · Square end

3 Flute Diamond Coated Square End Mills for Graphite

General-purpose graphite pocketing and profiling with balanced stability.

Diamond coatingSquare endStandard reach3 flutes
Diameter range
Ø1–12 mm
Standard sizes
32 SKUs
USD price range
$11.20–$108.40 / pc
View all 32 3DEM sizes and prices
Order code / SKUSpecificationDiameterRadiusFlute lengthNeck ØNeck lengthShank ØOverall lengthFlutesUSD / pc
3DEM 010 030 S04D1*3FL*45 OAL*4SH*3F1 mm—3 mm——4 mm45 mm3$11.8
3DEM 010 050 S04D1*3FL*5NL*45 OAL*4SH*3F1 mm—3 mm—5 mm4 mm45 mm3$11.8
3DEM 010 100 S04D1*3FL*10NL*45 OAL*4SH*3F1 mm—3 mm—10 mm4 mm45 mm3$11.8
3DEM 010 150 S04D1*3FL*15NL*45 OAL*4SH*3F1 mm—3 mm—15 mm4 mm45 mm3$11.8
3DEM 015 060 S04D1.5*6FL*60 OAL*4SH*3F1.5 mm—6 mm——4 mm60 mm3$12.8
3DEM 015 100 S04D1.5*6FL*10NL*60 OAL*4SH*3F1.5 mm—6 mm—10 mm4 mm60 mm3$12.8
3DEM 015 150 S04D1.5*6FL*15NL*60 OAL*4SH*3F1.5 mm—6 mm—15 mm4 mm60 mm3$12.8
3DEM 015 200 S04D1.5*6FL*20NL*60 OAL*4SH*3F1.5 mm—6 mm—20 mm4 mm60 mm3$12.8
3DEM 020 060 S04D2*6FL*45 OAL*4SH*3F2 mm—6 mm——4 mm45 mm3$11.8
3DEM 020 100 S04D2*10FL*10NL*60 OAL*4SH*3F2 mm—10 mm—10 mm4 mm60 mm3$12.8
3DEM 020 150 S04D2*10FL*15NL*60 OAL*4SH*3F2 mm—10 mm—15 mm4 mm60 mm3$12.8
3DEM 020 200 S04D2*10FL*20NL*60 OAL*4SH*3F2 mm—10 mm—20 mm4 mm60 mm3$12.8
3DEM 020 250 S04D2*10FL*25NL*60 OAL*4SH*3F2 mm—10 mm—25 mm4 mm60 mm3$13
3DEM 030 090 S06D3*9FL*50 OAL*6SH*3F3 mm—9 mm——6 mm50 mm3$18
3DEM 030 150 S03D3*15FL*60 OAL*3SH*3F3 mm—15 mm——3 mm60 mm3$11.2
3DEM 030 150 S04D3*15FL*60 OAL*4SH*3F3 mm—15 mm——4 mm60 mm3$12.8
3DEM 030 200 S04D3*15FL*20NL*60 OAL*4SH*3F3 mm—15 mm—20 mm4 mm60 mm3$12.8
3DEM 030 250 S04D3*15FL*25NL*60 OAL*4SH*3F3 mm—15 mm—25 mm4 mm60 mm3$13
3DEM 040 120 S06D4*12FL*50 OAL*6SH*3F4 mm—12 mm——6 mm50 mm3$18
3DEM 040 200 080D4*20FL*80 OAL*4SH*3F4 mm—20 mm——4 mm80 mm3$14
3DEM 060 180 060D6*18FL*60 OAL*6SH*3F6 mm—18 mm——6 mm60 mm3$22.6
3DEM 060 250 110D6*25FL*110 OAL*6SH*3F6 mm—25 mm——6 mm110 mm3$29.4
3DEM 060 250 150D6*25FL*150 OAL*6SH*3F6 mm—25 mm——6 mm150 mm3$36.4
3DEM 080 240 070D8*24FL*70 OAL*8SH*3F8 mm—24 mm——8 mm70 mm3$33.6
3DEM 080 350 110D8*35FL*110 OAL*8SH*3F8 mm—35 mm——8 mm110 mm3$42.8
3DEM 080 350 150D8*35FL*150 OAL*8SH*3F8 mm—35 mm——8 mm150 mm3$53.6
3DEM 100 250 080D10*25FL*80 OAL*10SH*3F10 mm—25 mm——10 mm80 mm3$50.8
3DEM 100 400 110D10*40FL*110 OAL*10SH*3F10 mm—40 mm——10 mm110 mm3$61.8
3DEM 100 500 160D10*50FL*160 OAL*10SH*3F10 mm—50 mm——10 mm160 mm3$82.2
3DEM 120 250 080D12*25FL*80 OAL*12SH*3F12 mm—25 mm——12 mm80 mm3$65.6
3DEM 120 450 110D12*45FL*110 OAL*12SH*3F12 mm—45 mm——12 mm110 mm3$80.8
3DEM 120 550 160D12*55FL*160 OAL*12SH*4F12 mm—55 mm——12 mm160 mm4$108.4
4 & 6 Flute Diamond Coated Square End Mills for Graphite technical drawing and product view
4DEM / 6DEM · Square end

4 & 6 Flute Diamond Coated Square End Mills for Graphite

High-speed finishing, low vibration, and fine square-bottomed features.

Diamond coatingSquare endStandard reach4 / 6 flutes
Diameter range
Ø2–16 mm
Standard sizes
27 SKUs
USD price range
$11.20–$213.80 / pc
View all 27 4DEM / 6DEM sizes and prices
Order code / SKUSpecificationDiameterRadiusFlute lengthNeck ØNeck lengthShank ØOverall lengthFlutesUSD / pc
4DEM 020 060 S04D2*6FL*45 OAL*4SH*4F2 mm—6 mm——4 mm45 mm4$11.8
4DEM 020 100 S04D2*10FL*60 OAL*4SH*4F2 mm—10 mm——4 mm60 mm4$12.8
4DEM 030 090 S06D3*9FL*50 OAL*6SH*4F3 mm—9 mm——6 mm50 mm4$18
4DEM 030 150 S03D3*15FL*60 OAL*3SH*4F3 mm—15 mm——3 mm60 mm4$11.2
4DEM 030 150 S04D3*15FL*60 OAL*4SH*4F3 mm—15 mm——4 mm60 mm4$12.8
4DEM 040 120 S06D4*12FL*50 OAL*6SH*4F4 mm—12 mm——6 mm50 mm4$18
4DEM 040 200 080D4*20FL*80 OAL*4SH*4F4 mm—20 mm——4 mm80 mm4$14
4DEM 040 200 100D4*20FL*100 OAL*4SH*4F4 mm—20 mm——4 mm100 mm4$15.2
4DEM 060 180 060D6*18FL*60 OAL*6SH*4F6 mm—18 mm——6 mm60 mm4$22.6
4DEM 060 250 110D6*25FL*110 OAL*6SH*4F6 mm—25 mm——6 mm110 mm4$29.4
4DEM 060 250 150D6*25FL*150 OAL*6SH*4F6 mm—25 mm——6 mm150 mm4$36.4
4DEM 080 240 070D8*24FL*70 OAL*8SH*4F8 mm—24 mm——8 mm70 mm4$33.6
4DEM 080 350 110D8*35FL*110 OAL*8SH*4F8 mm—35 mm——8 mm110 mm4$42.8
4DEM 080 350 150D8*35FL*150 OAL*8SH*4F8 mm—35 mm——8 mm150 mm4$53.6
4DEM 100 250 080D10*25FL*80 OAL*10SH*4F10 mm—25 mm——10 mm80 mm4$50.8
4DEM 100 400 110D10*40FL*110 OAL*10SH*4F10 mm—40 mm——10 mm110 mm4$61.8
4DEM 100 500 160D10*50FL*160 OAL*10SH*4F10 mm—50 mm——10 mm160 mm4$82.2
4DEM 120 250 080D12*25FL*80 OAL*12SH*4F12 mm—25 mm——12 mm80 mm4$65.6
4DEM 120 450 110D12*45FL*110 OAL*12SH*4F12 mm—45 mm——12 mm110 mm4$80.8
4DEM 120 550 160D12*55FL*160 OAL*12SH*4F12 mm—55 mm——12 mm160 mm4$108.4
6DEM 100 400 110D10*40FL*110 OAL*10SH*6F10 mm—40 mm——10 mm110 mm6$61.8
6DEM 100 400 160D10*40FL*160 OAL*10SH*6F10 mm—40 mm——10 mm160 mm6$82.2
6DEM 120 450 110D12*45FL*110 OAL*12SH*6F12 mm—45 mm——12 mm110 mm6$80.8
6DEM 120 450 160D12*45FL*160 OAL*12SH*6F12 mm—45 mm——12 mm160 mm6$108.4
6DEM 160 500 110D16*50FL*110 OAL*16SH*6F16 mm—50 mm——16 mm110 mm6$129.6
6DEM 160 500 160D16*50FL*160 OAL*16SH*6F16 mm—50 mm——16 mm160 mm6$176.4
6DEM 160 500 200D16*50FL*200 OAL*16SH*6F16 mm—50 mm——16 mm200 mm6$213.8
2 Flute Diamond Coated Corner Radius End Mills for Graphite technical drawing and product view
2DCR · Corner radius

2 Flute Diamond Coated Corner Radius End Mills for Graphite

Reinforced corners, small fillets, and rough-to-semi-finish electrode milling.

Diamond coatingCorner radiusStandard reach2 flutes
Diameter range
Ø0.2–6 mm
Standard sizes
164 SKUs
USD price range
$12.80–$33.20 / pc
View all 164 2DCR sizes and prices
Order code / SKUSpecificationDiameterRadiusFlute lengthNeck ØNeck lengthShank ØOverall lengthFlutesUSD / pc
2DCR 002 0002 015D0.2*R0.02*0.5FL*1.5NL*60 OAL*4SH*2F0.2 mmR0.020.5 mm—1.5 mm4 mm60 mm2$14
2DCR 003 0002 015D0.3*R0.02*0.6FL*1.5NL*60 OAL*4SH*2F0.3 mmR0.020.6 mm—1.5 mm4 mm60 mm2$14
2DCR 003 0002 030D0.3*R0.02*0.6FL*3NL*60 OAL*4SH*2F0.3 mmR0.020.6 mm—3 mm4 mm60 mm2$14
2DCR 003 0002 045D0.3*R0.02*0.6FL*4.5NL*60 OAL*4SH*2F0.3 mmR0.020.6 mm—4.5 mm4 mm60 mm2$14
2DCR 003 0002 060D0.3*R0.02*0.6FL*6NL*60 OAL*4SH*2F0.3 mmR0.020.6 mm—6 mm4 mm60 mm2$14
2DCR 004 0002 020D0.4*R0.02*0.8FL*2NL*60 OAL*4SH*2F0.4 mmR0.020.8 mm—2 mm4 mm60 mm2$14
2DCR 004 0002 040D0.4*R0.02*0.8FL*4NL*60 OAL*4SH*2F0.4 mmR0.020.8 mm—4 mm4 mm60 mm2$14
2DCR 004 0002 060D0.4*R0.02*0.8FL*6NL*60 OAL*4SH*2F0.4 mmR0.020.8 mm—6 mm4 mm60 mm2$14
2DCR 004 0002 080D0.4*R0.02*0.8FL*8NL*60 OAL*4SH*2F0.4 mmR0.020.8 mm—8 mm4 mm60 mm2$14
2DCR 005 0005 010D0.5*R0.05*1FL*60 OAL*4SH*2F0.5 mmR0.051 mm——4 mm60 mm2$14
2DCR 005 0005 025D0.5*R0.05*1FL*2.5NL*60 OAL*4SH*2F0.5 mmR0.051 mm—2.5 mm4 mm60 mm2$14
2DCR 005 0005 035D0.5*R0.05*1FL*3.5NL*60 OAL*4SH*2F0.5 mmR0.051 mm—3.5 mm4 mm60 mm2$14
2DCR 005 0005 050D0.5*R0.05*1FL*5NL*60 OAL*4SH*2F0.5 mmR0.051 mm—5 mm4 mm60 mm2$14
2DCR 005 0005 075D0.5*R0.05*1FL*7.5NL*60 OAL*4SH*2F0.5 mmR0.051 mm—7.5 mm4 mm60 mm2$14
2DCR 005 0005 100D0.5*R0.05*1FL*10NL*60 OAL*4SH*2F0.5 mmR0.051 mm—10 mm4 mm60 mm2$14
2DCR 006 0005 012D0.6*R0.05*1.2FL*60 OAL*4SH*2F0.6 mmR0.051.2 mm——4 mm60 mm2$14
2DCR 006 0005 030D0.6*R0.05*1.2FL*3NL*60 OAL*4SH*2F0.6 mmR0.051.2 mm—3 mm4 mm60 mm2$14
2DCR 006 0005 060D0.6*R0.05*1.2FL*6NL*60 OAL*4SH*2F0.6 mmR0.051.2 mm—6 mm4 mm60 mm2$14
2DCR 006 0005 090D0.6*R0.05*1.2FL*9NL*60 OAL*4SH*2F0.6 mmR0.051.2 mm—9 mm4 mm60 mm2$14
2DCR 006 0005 120D0.6*R0.05*1.2FL*12NL*60 OAL*4SH*2F0.6 mmR0.051.2 mm—12 mm4 mm60 mm2$14
2DCR 008 0005 016D0.8*R0.05*1.6FL*60 OAL*4SH*2F0.8 mmR0.051.6 mm——4 mm60 mm2$14
2DCR 008 0005 040D0.8*R0.05*1.6FL*4NL*60 OAL*4SH*2F0.8 mmR0.051.6 mm—4 mm4 mm60 mm2$14
2DCR 008 0005 080D0.8*R0.05*1.6FL*8NL*60 OAL*4SH*2F0.8 mmR0.051.6 mm—8 mm4 mm60 mm2$14
2DCR 008 0005 100D0.8*R0.05*1.6FL*10NL*60 OAL*4SH*2F0.8 mmR0.051.6 mm—10 mm4 mm60 mm2$14
2DCR 008 0005 160D0.8*R0.05*1.6FL*16NL*60 OAL*4SH*2F0.8 mmR0.051.6 mm—16 mm4 mm60 mm2$14
2DCR 010 0005 020D1*R0.05*2FL*60 OAL*4SH*2F1 mmR0.052 mm——4 mm60 mm2$12.8
2DCR 010 0005 050D1*R0.05*2FL*5NL*60 OAL*4SH*2F1 mmR0.052 mm—5 mm4 mm60 mm2$12.8
2DCR 010 0005 100D1*R0.05*2FL*10NL*60 OAL*4SH*2F1 mmR0.052 mm—10 mm4 mm60 mm2$12.8
2DCR 010 0005 150D1*R0.05*2FL*15NL*60 OAL*4SH*2F1 mmR0.052 mm—15 mm4 mm60 mm2$12.8
2DCR 010 0005 200D1*R0.05*2FL*20NL*60 OAL*4SH*2F1 mmR0.052 mm—20 mm4 mm60 mm2$12.8
2DCR 010 001 020D1*R0.1*2FL*60 OAL*4SH*2F1 mmR0.12 mm——4 mm60 mm2$12.8
2DCR 010 001 050D1*R0.1*2FL*5NL*60 OAL*4SH*2F1 mmR0.12 mm—5 mm4 mm60 mm2$12.8
2DCR 010 001 100D1*R0.1*2FL*10NL*60 OAL*4SH*2F1 mmR0.12 mm—10 mm4 mm60 mm2$12.8
2DCR 010 001 150D1*R0.1*2FL*15NL*60 OAL*4SH*2F1 mmR0.12 mm—15 mm4 mm60 mm2$12.8
2DCR 010 001 200D1*R0.1*2FL*20NL*60 OAL*4SH*2F1 mmR0.12 mm—20 mm4 mm60 mm2$12.8
2DCR 010 002 020D1*R0.2*2FL*60 OAL*4SH*2F1 mmR0.22 mm——4 mm60 mm2$12.8
2DCR 010 002 050D1*R0.2*2FL*5NL*60 OAL*4SH*2F1 mmR0.22 mm—5 mm4 mm60 mm2$12.8
2DCR 010 002 100D1*R0.2*2FL*10NL*60 OAL*4SH*2F1 mmR0.22 mm—10 mm4 mm60 mm2$12.8
2DCR 010 002 150D1*R0.2*2FL*15NL*60 OAL*4SH*2F1 mmR0.22 mm—15 mm4 mm60 mm2$12.8
2DCR 010 002 200D1*R0.2*2FL*20NL*60 OAL*4SH*2F1 mmR0.22 mm—20 mm4 mm60 mm2$12.8
2DCR 015 0005 030D1.5*R0.05*3FL*60 OAL*4SH*2F1.5 mmR0.053 mm——4 mm60 mm2$12.8
2DCR 015 0005 050D1.5*R0.05*3FL*5NL*60 OAL*4SH*2F1.5 mmR0.053 mm—5 mm4 mm60 mm2$12.8
2DCR 015 0005 100D1.5*R0.05*3FL*10NL*60 OAL*4SH*2F1.5 mmR0.053 mm—10 mm4 mm60 mm2$12.8
2DCR 015 0005 150D1.5*R0.05*3FL*15NL*60 OAL*4SH*2F1.5 mmR0.053 mm—15 mm4 mm60 mm2$12.8
2DCR 015 0005 200D1.5*R0.05*3FL*20NL*60 OAL*4SH*2F1.5 mmR0.053 mm—20 mm4 mm60 mm2$12.8
2DCR 015 001 030D1.5*R0.1*3FL*60 OAL*4SH*2F1.5 mmR0.13 mm——4 mm60 mm2$12.8
2DCR 015 001 050D1.5*R0.1*3FL*5NL*60 OAL*4SH*2F1.5 mmR0.13 mm—5 mm4 mm60 mm2$12.8
2DCR 015 001 100D1.5*R0.1*3FL*10NL*60 OAL*4SH*2F1.5 mmR0.13 mm—10 mm4 mm60 mm2$12.8
2DCR 015 001 150D1.5*R0.1*3FL*15NL*60 OAL*4SH*2F1.5 mmR0.13 mm—15 mm4 mm60 mm2$12.8
2DCR 015 001 200D1.5*R0.1*3FL*20NL*60 OAL*4SH*2F1.5 mmR0.13 mm—20 mm4 mm60 mm2$12.8
2DCR 015 0015 030D1.5*R0.15*3FL*60 OAL*4SH*2F1.5 mmR0.153 mm——4 mm60 mm2$12.8
2DCR 015 0015 050D1.5*R0.15*3FL*5NL*60 OAL*4SH*2F1.5 mmR0.153 mm—5 mm4 mm60 mm2$12.8
2DCR 015 0015 100D1.5*R0.15*3FL*10NL*60 OAL*4SH*2F1.5 mmR0.153 mm—10 mm4 mm60 mm2$12.8
2DCR 015 0015 150D1.5*R0.15*3FL*15NL*60 OAL*4SH*2F1.5 mmR0.153 mm—15 mm4 mm60 mm2$12.8
2DCR 015 0015 200D1.5*R0.15*3FL*20NL*60 OAL*4SH*2F1.5 mmR0.153 mm—20 mm4 mm60 mm2$12.8
2DCR 015 002 030D1.5*R0.2*3FL*60 OAL*4SH*2F1.5 mmR0.23 mm——4 mm60 mm2$12.8
2DCR 015 002 050D1.5*R0.2*3FL*5NL*60 OAL*4SH*2F1.5 mmR0.23 mm—5 mm4 mm60 mm2$12.8
2DCR 015 002 100D1.5*R0.2*3FL*10NL*60 OAL*4SH*2F1.5 mmR0.23 mm—10 mm4 mm60 mm2$12.8
2DCR 015 002 150D1.5*R0.2*3FL*15NL*60 OAL*4SH*2F1.5 mmR0.23 mm—15 mm4 mm60 mm2$12.8
2DCR 015 002 200D1.5*R0.2*3FL*20NL*60 OAL*4SH*2F1.5 mmR0.23 mm—20 mm4 mm60 mm2$12.8
2DCR 015 003 030D1.5*R0.3*3FL*60 OAL*4SH*2F1.5 mmR0.33 mm——4 mm60 mm2$12.8
2DCR 015 003 050D1.5*R0.3*3FL*5NL*60 OAL*4SH*2F1.5 mmR0.33 mm—5 mm4 mm60 mm2$12.8
2DCR 015 003 100D1.5*R0.3*3FL*10NL*60 OAL*4SH*2F1.5 mmR0.33 mm—10 mm4 mm60 mm2$12.8
2DCR 015 003 150D1.5*R0.3*3FL*15NL*60 OAL*4SH*2F1.5 mmR0.33 mm—15 mm4 mm60 mm2$12.8
2DCR 015 003 200D1.5*R0.3*3FL*20NL*60 OAL*4SH*2F1.5 mmR0.33 mm—20 mm4 mm60 mm2$12.8
2DCR 020 0005 035D2*R0.05*3.5FL*60 OAL*4SH*2F2 mmR0.053.5 mm——4 mm60 mm2$12.8
2DCR 020 0005 060D2*R0.05*3.5FL*6NL*60 OAL*4SH*2F2 mmR0.053.5 mm—6 mm4 mm60 mm2$12.8
2DCR 020 0005 120D2*R0.05*3.5FL*12NL*60 OAL*4SH*2F2 mmR0.053.5 mm—12 mm4 mm60 mm2$12.8
2DCR 020 0005 180D2*R0.05*3.5FL*18NL*60 OAL*4SH*2F2 mmR0.053.5 mm—18 mm4 mm60 mm2$12.8
2DCR 020 0005 250D2*R0.05*3.5FL*25NL*60 OAL*4SH*2F2 mmR0.053.5 mm—25 mm4 mm60 mm2$13
2DCR 020 0005 300D2*R0.05*3.5FL*30NL*60 OAL*4SH*2F2 mmR0.053.5 mm—30 mm4 mm60 mm2$14.4
2DCR 020 001 035D2*R0.1*3.5FL*60 OAL*4SH*2F2 mmR0.13.5 mm——4 mm60 mm2$12.8
2DCR 020 001 060D2*R0.1*3.5FL*6NL*60 OAL*4SH*2F2 mmR0.13.5 mm—6 mm4 mm60 mm2$12.8
2DCR 020 001 120D2*R0.1*3.5FL*12NL*60 OAL*4SH*2F2 mmR0.13.5 mm—12 mm4 mm60 mm2$12.8
2DCR 020 001 180D2*R0.1*3.5FL*18NL*60 OAL*4SH*2F2 mmR0.13.5 mm—18 mm4 mm60 mm2$12.8
2DCR 020 001 250D2*R0.1*3.5FL*25NL*60 OAL*4SH*2F2 mmR0.13.5 mm—25 mm4 mm60 mm2$13
2DCR 020 001 300D2*R0.1*3.5FL*30NL*60 OAL*4SH*2F2 mmR0.13.5 mm—30 mm4 mm60 mm2$14.4
2DCR 020 002 035D2*R0.2*3.5FL*60 OAL*4SH*2F2 mmR0.23.5 mm——4 mm60 mm2$12.8
2DCR 020 002 060D2*R0.2*3.5FL*6NL*60 OAL*4SH*2F2 mmR0.23.5 mm—6 mm4 mm60 mm2$12.8
2DCR 020 002 120D2*R0.2*3.5FL*12NL*60 OAL*4SH*2F2 mmR0.23.5 mm—12 mm4 mm60 mm2$12.8
2DCR 020 002 180D2*R0.2*3.5FL*18NL*60 OAL*4SH*2F2 mmR0.23.5 mm—18 mm4 mm60 mm2$12.8
2DCR 020 002 250D2*R0.2*3.5FL*25NL*60 OAL*4SH*2F2 mmR0.23.5 mm—25 mm4 mm60 mm2$13
2DCR 020 002 300D2*R0.2*3.5FL*30NL*60 OAL*4SH*2F2 mmR0.23.5 mm—30 mm4 mm60 mm2$14.4
2DCR 020 003 035D2*R0.3*3.5FL*60 OAL*4SH*2F2 mmR0.33.5 mm——4 mm60 mm2$12.8
2DCR 020 003 060D2*R0.3*3.5FL*6NL*60 OAL*4SH*2F2 mmR0.33.5 mm—6 mm4 mm60 mm2$12.8
2DCR 020 003 120D2*R0.3*3.5FL*12NL*60 OAL*4SH*2F2 mmR0.33.5 mm—12 mm4 mm60 mm2$12.8
2DCR 020 003 180D2*R0.3*3.5FL*18NL*60 OAL*4SH*2F2 mmR0.33.5 mm—18 mm4 mm60 mm2$12.8
2DCR 020 003 250D2*R0.3*3.5FL*25NL*60 OAL*4SH*2F2 mmR0.33.5 mm—25 mm4 mm60 mm2$13
2DCR 020 003 300D2*R0.3*3.5FL*30NL*60 OAL*4SH*2F2 mmR0.33.5 mm—30 mm4 mm60 mm2$14.4
2DCR 020 005 035D2*R0.5*3.5FL*60 OAL*4SH*2F2 mmR0.53.5 mm——4 mm60 mm2$12.8
2DCR 020 005 060D2*R0.5*3.5FL*6NL*60 OAL*4SH*2F2 mmR0.53.5 mm—6 mm4 mm60 mm2$12.8
2DCR 020 005 120D2*R0.5*3.5FL*12NL*60 OAL*4SH*2F2 mmR0.53.5 mm—12 mm4 mm60 mm2$12.8
2DCR 020 005 180D2*R0.5*3.5FL*18NL*60 OAL*4SH*2F2 mmR0.53.5 mm—18 mm4 mm60 mm2$12.8
2DCR 020 005 250D2*R0.5*3.5FL*25NL*60 OAL*4SH*2F2 mmR0.53.5 mm—25 mm4 mm60 mm2$13
2DCR 020 005 300D2*R0.5*3.5FL*30NL*60 OAL*4SH*2F2 mmR0.53.5 mm—30 mm4 mm60 mm2$14.4
2DCR 030 0005 040D3*R0.05*4FL*80 OAL*4SH*2F3 mmR0.054 mm——4 mm80 mm2$14
2DCR 030 0005 100D3*R0.05*4FL*10NL*80 OAL*4SH*2F3 mmR0.054 mm—10 mm4 mm80 mm2$14
2DCR 030 0005 200D3*R0.05*4FL*20NL*80 OAL*4SH*2F3 mmR0.054 mm—20 mm4 mm80 mm2$14
2DCR 030 0005 300D3*R0.05*4FL*30NL*80 OAL*4SH*2F3 mmR0.054 mm—30 mm4 mm80 mm2$15.6
2DCR 030 0005 400D3*R0.05*4FL*40NL*80 OAL*4SH*2F3 mmR0.054 mm—40 mm4 mm80 mm2$18.4
2DCR 030 002 040D3*R0.2*4FL*80 OAL*4SH*2F3 mmR0.24 mm——4 mm80 mm2$14
2DCR 030 002 100D3*R0.2*4FL*10NL*80 OAL*4SH*2F3 mmR0.24 mm—10 mm4 mm80 mm2$14
2DCR 030 002 200D3*R0.2*4FL*20NL*80 OAL*4SH*2F3 mmR0.24 mm—20 mm4 mm80 mm2$14
2DCR 030 002 300D3*R0.2*4FL*30NL*80 OAL*4SH*2F3 mmR0.24 mm—30 mm4 mm80 mm2$15.6
2DCR 030 002 400D3*R0.2*4FL*40NL*80 OAL*4SH*2F3 mmR0.24 mm—40 mm4 mm80 mm2$18.4
2DCR 030 003 040D3*R0.3*4FL*80 OAL*4SH*2F3 mmR0.34 mm——4 mm80 mm2$14
2DCR 030 003 100D3*R0.3*4FL*10NL*80 OAL*4SH*2F3 mmR0.34 mm—10 mm4 mm80 mm2$14
2DCR 030 003 200D3*R0.3*4FL*20NL*80 OAL*4SH*2F3 mmR0.34 mm—20 mm4 mm80 mm2$14
2DCR 030 003 300D3*R0.3*4FL*30NL*80 OAL*4SH*2F3 mmR0.34 mm—30 mm4 mm80 mm2$15.6
2DCR 030 003 400D3*R0.3*4FL*40NL*80 OAL*4SH*2F3 mmR0.34 mm—40 mm4 mm80 mm2$18.4
2DCR 030 005 040D3*R0.5*4FL*80 OAL*4SH*2F3 mmR0.54 mm——4 mm80 mm2$14
2DCR 030 005 100D3*R0.5*4FL*10NL*80 OAL*4SH*2F3 mmR0.54 mm—10 mm4 mm80 mm2$14
2DCR 030 005 200D3*R0.5*4FL*20NL*80 OAL*4SH*2F3 mmR0.54 mm—20 mm4 mm80 mm2$14
2DCR 030 005 300D3*R0.5*4FL*30NL*80 OAL*4SH*2F3 mmR0.54 mm—30 mm4 mm80 mm2$15.6
2DCR 030 005 400D3*R0.5*4FL*40NL*80 OAL*4SH*2F3 mmR0.54 mm—40 mm4 mm80 mm2$18.4
2DCR 030 010 040D3*R1*4FL*80 OAL*4SH*2F3 mmR14 mm——4 mm80 mm2$14
2DCR 030 010 100D3*R1*4FL*10NL*80 OAL*4SH*2F3 mmR14 mm—10 mm4 mm80 mm2$14
2DCR 030 010 200D3*R1*4FL*20NL*80 OAL*4SH*2F3 mmR14 mm—20 mm4 mm80 mm2$14
2DCR 030 010 300D3*R1*4FL*30NL*80 OAL*4SH*2F3 mmR14 mm—30 mm4 mm80 mm2$15.6
2DCR 030 010 400D3*R1*4FL*40NL*80 OAL*4SH*2F3 mmR14 mm—40 mm4 mm80 mm2$18.4
2DCR 040 0005 050D4*R0.05*5FL*80 OAL*4SH*2F4 mmR0.055 mm——4 mm80 mm2$14
2DCR 040 0005 150D4*R0.05*5FL*15NL*80 OAL*4SH*2F4 mmR0.055 mm—15 mm4 mm80 mm2$14
2DCR 040 0005 250D4*R0.05*5FL*25NL*80 OAL*4SH*2F4 mmR0.055 mm—25 mm4 mm80 mm2$14.2
2DCR 040 0005 400D4*R0.05*5FL*40NL*80 OAL*4SH*2F4 mmR0.055 mm—40 mm4 mm80 mm2$18.4
2DCR 040 002 050D4*R0.2*5FL*80 OAL*4SH*2F4 mmR0.25 mm——4 mm80 mm2$14
2DCR 040 002 150D4*R0.2*5FL*15NL*80 OAL*4SH*2F4 mmR0.25 mm—15 mm4 mm80 mm2$14
2DCR 040 002 250D4*R0.2*5FL*25NL*80 OAL*4SH*2F4 mmR0.25 mm—25 mm4 mm80 mm2$14.2
2DCR 040 002 400D4*R0.2*5FL*40NL*80 OAL*4SH*2F4 mmR0.25 mm—40 mm4 mm80 mm2$18.4
2DCR 040 005 050D4*R0.5*5FL*80 OAL*4SH*2F4 mmR0.55 mm——4 mm80 mm2$14
2DCR 040 005 150D4*R0.5*5FL*15NL*80 OAL*4SH*2F4 mmR0.55 mm—15 mm4 mm80 mm2$14
2DCR 040 005 250D4*R0.5*5FL*25NL*80 OAL*4SH*2F4 mmR0.55 mm—25 mm4 mm80 mm2$14.2
2DCR 040 005 400D4*R0.5*5FL*40NL*80 OAL*4SH*2F4 mmR0.55 mm—40 mm4 mm80 mm2$18.4
2DCR 040 010 050D4*R1*5FL*80 OAL*4SH*2F4 mmR15 mm——4 mm80 mm2$14
2DCR 040 010 150D4*R1*5FL*15NL*80 OAL*4SH*2F4 mmR15 mm—15 mm4 mm80 mm2$14
2DCR 040 010 250D4*R1*5FL*25NL*80 OAL*4SH*2F4 mmR15 mm—25 mm4 mm80 mm2$14.2
2DCR 040 010 400D4*R1*5FL*40NL*80 OAL*4SH*2F4 mmR15 mm—40 mm4 mm80 mm2$18.4
2DCR 050 0005 060D5*R0.05*6FL*110 OAL*6SH*2F5 mmR0.056 mm——6 mm110 mm2$27.8
2DCR 050 0005 150D5*R0.05*6FL*15NL*110 OAL*6SH*2F5 mmR0.056 mm—15 mm6 mm110 mm2$27.8
2DCR 050 0005 300D5*R0.05*6FL*30NL*110 OAL*6SH*2F5 mmR0.056 mm—30 mm6 mm110 mm2$27.8
2DCR 050 0005 500D5*R0.05*6FL*50NL*110 OAL*6SH*2F5 mmR0.056 mm—50 mm6 mm110 mm2$33.2
2DCR 050 002 060D5*R0.2*6FL*110 OAL*6SH*2F5 mmR0.26 mm——6 mm110 mm2$27.8
2DCR 050 002 150D5*R0.2*6FL*15NL*110 OAL*6SH*2F5 mmR0.26 mm—15 mm6 mm110 mm2$27.8
2DCR 050 002 300D5*R0.2*6FL*30NL*110 OAL*6SH*2F5 mmR0.26 mm—30 mm6 mm110 mm2$27.8
2DCR 050 002 500D5*R0.2*6FL*50NL*110 OAL*6SH*2F5 mmR0.26 mm—50 mm6 mm110 mm2$33.2
2DCR 050 005 060D5*R0.2*6FL*110 OAL*6SH*2F5 mmR0.26 mm——6 mm110 mm2$27.8
2DCR 050 005 150D5*R0.2*6FL*15NL*110 OAL*6SH*2F5 mmR0.26 mm—15 mm6 mm110 mm2$27.8
2DCR 050 005 300D5*R0.2*6FL*30NL*110 OAL*6SH*2F5 mmR0.26 mm—30 mm6 mm110 mm2$27.8
2DCR 050 005 500D5*R0.2*6FL*50NL*110 OAL*6SH*2F5 mmR0.26 mm—50 mm6 mm110 mm2$33.2
2DCR 060 0005 070D6*R0.05*7FL*110 OAL*6SH*2F6 mmR0.057 mm——6 mm110 mm2$29.4
2DCR 060 0005 200D6*R0.05*7FL*20NL*110 OAL*6SH*2F6 mmR0.057 mm—20 mm6 mm110 mm2$29.4
2DCR 060 0005 300D6*R0.05*7FL*30NL*110 OAL*6SH*2F6 mmR0.057 mm—30 mm6 mm110 mm2$29.4
2DCR 060 0005 500D6*R0.05*7FL*50NL*110 OAL*6SH*2F6 mmR0.057 mm—50 mm6 mm110 mm2$33.2
2DCR 060 002 070D6*R0.2*7FL*110 OAL*6SH*2F6 mmR0.27 mm——6 mm110 mm2$29.4
2DCR 060 002 200D6*R0.2*7FL*20NL*110 OAL*6SH*2F6 mmR0.27 mm—20 mm6 mm110 mm2$29.4
2DCR 060 002 300D6*R0.2*7FL*30NL*110 OAL*6SH*2F6 mmR0.27 mm—30 mm6 mm110 mm2$29.4
2DCR 060 002 500D6*R0.2*7FL*50NL*110 OAL*6SH*2F6 mmR0.27 mm—50 mm6 mm110 mm2$33.2
2DCR 060 005 070D6*R0.5*7FL*110 OAL*6SH*2F6 mmR0.57 mm——6 mm110 mm2$29.4
2DCR 060 005 200D6*R0.5*7FL*20NL*110 OAL*6SH*2F6 mmR0.57 mm—20 mm6 mm110 mm2$29.4
2DCR 060 005 300D6*R0.5*7FL*30NL*110 OAL*6SH*2F6 mmR0.57 mm—30 mm6 mm110 mm2$29.4
2DCR 060 005 500D6*R0.5*7FL*50NL*110 OAL*6SH*2F6 mmR0.57 mm—50 mm6 mm110 mm2$33.2
2DCR 060 010 070D6*R1*7FL*110 OAL*6SH*2F6 mmR17 mm——6 mm110 mm2$29.4
2DCR 060 010 200D6*R1*7FL*20NL*110 OAL*6SH*2F6 mmR17 mm—20 mm6 mm110 mm2$29.4
2DCR 060 010 300D6*R1*7FL*30NL*110 OAL*6SH*2F6 mmR17 mm—30 mm6 mm110 mm2$29.4
2DCR 060 010 500D6*R1*7FL*50NL*110 OAL*6SH*2F6 mmR17 mm—50 mm6 mm110 mm2$33.2
4 Flute Diamond Coated Corner Radius End Mills for Graphite technical drawing and product view
4DCR · Corner radius

4 Flute Diamond Coated Corner Radius End Mills for Graphite

Stable finishing of radiused shoulders, pockets, and electrode walls.

Diamond coatingCorner radiusStandard reach4 flutes
Diameter range
Ø2–12 mm
Standard sizes
83 SKUs
USD price range
$12.80–$108.40 / pc
View all 83 4DCR sizes and prices
Order code / SKUSpecificationDiameterRadiusFlute lengthNeck ØNeck lengthShank ØOverall lengthFlutesUSD / pc
4DCR 020 0005 035D2*R0.05*3.5FL*60 OAL*4SH*4F2 mmR0.053.5 mm——4 mm60 mm4$12.8
4DCR 020 0005 060D2*R0.05*3.5FL*6NL*60 OAL*4SH*4F2 mmR0.053.5 mm—6 mm4 mm60 mm4$12.8
4DCR 020 0005 120D2*R0.05*3.5FL*12NL*60 OAL*4SH*4F2 mmR0.053.5 mm—12 mm4 mm60 mm4$12.8
4DCR 020 0005 180D2*R0.05*3.5FL*18NL*60 OAL*4SH*4F2 mmR0.053.5 mm—18 mm4 mm60 mm4$12.8
4DCR 020 0005 250D2*R0.05*3.5FL*25NL*60 OAL*4SH*4F2 mmR0.053.5 mm—25 mm4 mm60 mm4$13
4DCR 020 0005 300D2*R0.05*3.5FL*30NL*60 OAL*4SH*4F2 mmR0.053.5 mm—30 mm4 mm60 mm4$14.4
4DCR 020 001 035D2*R0.1*3.5FL*60 OAL*4SH*4F2 mmR0.13.5 mm——4 mm60 mm4$12.8
4DCR 020 001 060D2*R0.1*3.5FL*6NL*60 OAL*4SH*4F2 mmR0.13.5 mm—6 mm4 mm60 mm4$12.8
4DCR 020 001 120D2*R0.1*3.5FL*12NL*60 OAL*4SH*4F2 mmR0.13.5 mm—12 mm4 mm60 mm4$12.8
4DCR 020 001 180D2*R0.1*3.5FL*18NL*60 OAL*4SH*4F2 mmR0.13.5 mm—18 mm4 mm60 mm4$12.8
4DCR 020 001 250D2*R0.1*3.5FL*25NL*60 OAL*4SH*4F2 mmR0.13.5 mm—25 mm4 mm60 mm4$13
4DCR 020 001 300D2*R0.1*3.5FL*30NL*60 OAL*4SH*4F2 mmR0.13.5 mm—30 mm4 mm60 mm4$14.4
4DCR 020 002 035D2*R0.2*3.5FL*60 OAL*4SH*4F2 mmR0.23.5 mm——4 mm60 mm4$12.8
4DCR 020 002 060D2*R0.2*3.5FL*6NL*60 OAL*4SH*4F2 mmR0.23.5 mm—6 mm4 mm60 mm4$12.8
4DCR 020 002 120D2*R0.2*3.5FL*12NL*60 OAL*4SH*4F2 mmR0.23.5 mm—12 mm4 mm60 mm4$12.8
4DCR 020 002 180D2*R0.2*3.5FL*18NL*60 OAL*4SH*4F2 mmR0.23.5 mm—18 mm4 mm60 mm4$12.8
4DCR 020 002 250D2*R0.2*3.5FL*25NL*60 OAL*4SH*4F2 mmR0.23.5 mm—25 mm4 mm60 mm4$13
4DCR 020 002 300D2*R0.2*3.5FL*30NL*60 OAL*4SH*4F2 mmR0.23.5 mm—30 mm4 mm60 mm4$14.4
4DCR 020 003 035D2*R0.3*3.5FL*60 OAL*4SH*4F2 mmR0.33.5 mm——4 mm60 mm4$12.8
4DCR 020 003 060D2*R0.3*3.5FL*6NL*60 OAL*4SH*4F2 mmR0.33.5 mm—6 mm4 mm60 mm4$12.8
4DCR 020 003 120D2*R0.3*3.5FL*12NL*60 OAL*4SH*4F2 mmR0.33.5 mm—12 mm4 mm60 mm4$12.8
4DCR 020 003 180D2*R0.3*3.5FL*18NL*60 OAL*4SH*4F2 mmR0.33.5 mm—18 mm4 mm60 mm4$12.8
4DCR 020 003 250D2*R0.3*3.5FL*25NL*60 OAL*4SH*4F2 mmR0.33.5 mm—25 mm4 mm60 mm4$13
4DCR 020 003 300D2*R0.3*3.5FL*30NL*60 OAL*4SH*4F2 mmR0.33.5 mm—30 mm4 mm60 mm4$14.4
4DCR 020 005 035D2*R0.5*3.5FL*60 OAL*4SH*4F2 mmR0.53.5 mm——4 mm60 mm4$12.8
4DCR 020 005 060D2*R0.5*3.5FL*6NL*60 OAL*4SH*4F2 mmR0.53.5 mm—6 mm4 mm60 mm4$12.8
4DCR 020 005 120D2*R0.5*3.5FL*12NL*60 OAL*4SH*4F2 mmR0.53.5 mm—12 mm4 mm60 mm4$12.8
4DCR 020 005 180D2*R0.5*3.5FL*18NL*60 OAL*4SH*4F2 mmR0.53.5 mm—18 mm4 mm60 mm4$12.8
4DCR 020 005 250D2*R0.5*3.5FL*25NL*60 OAL*4SH*4F2 mmR0.53.5 mm—25 mm4 mm60 mm4$13
4DCR 020 005 300D2*R0.5*3.5FL*30NL*60 OAL*4SH*4F2 mmR0.53.5 mm—30 mm4 mm60 mm4$14.4
4DCR 030 0005 040D3*R0.05*4FL*80 OAL*4SH*4F3 mmR0.054 mm——4 mm80 mm4$14
4DCR 030 0005 100D3*R0.05*4FL*10NL*80 OAL*4SH*4F3 mmR0.054 mm—10 mm4 mm80 mm4$14
4DCR 030 0005 200D3*R0.05*4FL*20NL*80 OAL*4SH*4F3 mmR0.054 mm—20 mm4 mm80 mm4$14
4DCR 030 0005 300D3*R0.05*4FL*30NL*80 OAL*4SH*4F3 mmR0.054 mm—30 mm4 mm80 mm4$15.6
4DCR 030 0005 400D3*R0.05*4FL*40NL*80 OAL*4SH*4F3 mmR0.054 mm—40 mm4 mm80 mm4$18.4
4DCR 030 001 040D3*R0.1*4FL*80 OAL*4SH*4F3 mmR0.14 mm——4 mm80 mm4$14
4DCR 030 001 100D3*R0.1*4FL*10NL*80 OAL*4SH*4F3 mmR0.14 mm—10 mm4 mm80 mm4$14
4DCR 030 001 200D3*R0.1*4FL*20NL*80 OAL*4SH*4F3 mmR0.14 mm—20 mm4 mm80 mm4$14
4DCR 030 001 300D3*R0.1*4FL*30NL*80 OAL*4SH*4F3 mmR0.14 mm—30 mm4 mm80 mm4$15.6
4DCR 030 001 400D3*R0.1*4FL*40NL*80 OAL*4SH*4F3 mmR0.14 mm—40 mm4 mm80 mm4$18.4
4DCR 030 002 040D3*R0.2*4FL*80 OAL*4SH*4F3 mmR0.24 mm——4 mm80 mm4$14
4DCR 030 002 100D3*R0.2*4FL*10NL*80 OAL*4SH*4F3 mmR0.24 mm—10 mm4 mm80 mm4$14
4DCR 030 002 200D3*R0.2*4FL*20NL*80 OAL*4SH*4F3 mmR0.24 mm—20 mm4 mm80 mm4$14
4DCR 030 002 300D3*R0.2*4FL*30NL*80 OAL*4SH*4F3 mmR0.24 mm—30 mm4 mm80 mm4$15.6
4DCR 030 002 400D3*R0.2*4FL*40NL*80 OAL*4SH*4F3 mmR0.24 mm—40 mm4 mm80 mm4$18.4
4DCR 030 003 040D3*R0.3*4FL*80 OAL*4SH*4F3 mmR0.34 mm——4 mm80 mm4$14
4DCR 030 003 100D3*R0.3*4FL*10NL*80 OAL*4SH*4F3 mmR0.34 mm—10 mm4 mm80 mm4$14
4DCR 030 003 200D3*R0.3*4FL*20NL*80 OAL*4SH*4F3 mmR0.34 mm—20 mm4 mm80 mm4$14
4DCR 030 003 300D3*R0.3*4FL*30NL*80 OAL*4SH*4F3 mmR0.34 mm—30 mm4 mm80 mm4$15.6
4DCR 030 003 400D3*R0.3*4FL*40NL*80 OAL*4SH*4F3 mmR0.34 mm—40 mm4 mm80 mm4$18.4
4DCR 030 005 040D3*R0.5*4FL*80 OAL*4SH*4F3 mmR0.54 mm——4 mm80 mm4$14
4DCR 030 005 100D3*R0.5*4FL*10NL*80 OAL*4SH*4F3 mmR0.54 mm—10 mm4 mm80 mm4$14
4DCR 030 005 200D3*R0.5*4FL*20NL*80 OAL*4SH*4F3 mmR0.54 mm—20 mm4 mm80 mm4$14
4DCR 030 005 300D3*R0.5*4FL*30NL*80 OAL*4SH*4F3 mmR0.54 mm—30 mm4 mm80 mm4$15.6
4DCR 030 005 400D3*R0.5*4FL*40NL*80 OAL*4SH*4F3 mmR0.54 mm—40 mm4 mm80 mm4$18.4
4DCR 030 010 040D3*R1*4FL*80 OAL*4SH*4F3 mmR14 mm——4 mm80 mm4$14
4DCR 030 010 100D3*R1*4FL*10NL*80 OAL*4SH*4F3 mmR14 mm—10 mm4 mm80 mm4$14
4DCR 030 010 200D3*R1*4FL*20NL*80 OAL*4SH*4F3 mmR14 mm—20 mm4 mm80 mm4$14
4DCR 030 010 300D3*R1*4FL*30NL*80 OAL*4SH*4F3 mmR14 mm—30 mm4 mm80 mm4$15.6
4DCR 030 010 400D3*R1*4FL*40NL*80 OAL*4SH*4F3 mmR14 mm—40 mm4 mm80 mm4$18.4
4DCR 040 001 100D4*R0.1*6FL*20NL*100 OAL*4SH*4F4 mmR0.16 mm—20 mm4 mm100 mm4$15.2
4DCR 040 002 100D4*R0.2*6FL*20NL*100 OAL*4SH*4F4 mmR0.26 mm—20 mm4 mm100 mm4$15.2
4DCR 040 003 100D4*R0.3*6FL*20NL*100 OAL*4SH*4F4 mmR0.36 mm—20 mm4 mm100 mm4$15.2
4DCR 040 005 100D4*R0.5*6FL*20NL*100 OAL*4SH*4F4 mmR0.56 mm—20 mm4 mm100 mm4$15.2
4DCR 040 010 100D4*R1*6FL*20NL*100 OAL*4SH*4F4 mmR16 mm—20 mm4 mm100 mm4$15.2
4DCR 060 003 110D6*R0.3*9FL*25NL*110 OAL*6SH*4F6 mmR0.39 mm—25 mm6 mm110 mm4$29.4
4DCR 060 005 110D6*R0.5*9FL*25NL*110 OAL*6SH*4F6 mmR0.59 mm—25 mm6 mm110 mm4$29.4
4DCR 060 005 150D6*R0.5*9FL*30NL*150 OAL*6SH*4F6 mmR0.59 mm—30 mm6 mm150 mm4$36.4
4DCR 060 010 110D6*R1*9FL*25NL*110 OAL*6SH*4F6 mmR19 mm—25 mm6 mm110 mm4$29.4
4DCR 060 010 150D6*R1*9FL*30NL*150 OAL*6SH*4F6 mmR19 mm—30 mm6 mm150 mm4$36.4
4DCR 080 003 110D8*R0.3*12FL*30NL*110 OAL*8SH*4F8 mmR0.312 mm—30 mm8 mm110 mm4$42.8
4DCR 080 005 110D8*R0.5*12FL*30NL*110 OAL*8SH*4F8 mmR0.512 mm—30 mm8 mm110 mm4$42.8
4DCR 080 005 150D8*R0.5*12FL*40NL*150 OAL*8SH*4F8 mmR0.512 mm—40 mm8 mm150 mm4$53.6
4DCR 080 010 110D8*R1*12FL*30NL*110 OAL*8SH*4F8 mmR112 mm—30 mm8 mm110 mm4$42.8
4DCR 080 010 150D8*R1*12FL*40NL*150 OAL*8SH*4F8 mmR112 mm—40 mm8 mm150 mm4$53.6
4DCR 100 005 110D10*R0.5*15FL*35NL*110 OAL*10SH*4F10 mmR0.515 mm—35 mm10 mm110 mm4$61.8
4DCR 100 005 160D10*R0.5*15FL*45NL*160 OAL*10SH*4F10 mmR0.515 mm—45 mm10 mm160 mm4$82.2
4DCR 100 010 110D10*R1*15FL*35NL*110 OAL*10SH*4F10 mmR115 mm—35 mm10 mm110 mm4$61.8
4DCR 100 010 160D10*R1*15FL*45NL*160 OAL*10SH*4F10 mmR115 mm—45 mm10 mm160 mm4$82.2
4DCR 120 005 110D12*R0.5*18FL*40NL*110 OAL*12SH*4F12 mmR0.518 mm—40 mm12 mm110 mm4$80.8
4DCR 120 005 160D12*R0.5*18FL*45NL*160 OAL*12SH*4F12 mmR0.518 mm—45 mm12 mm160 mm4$108.4
4DCR 120 010 110D12*R1*18FL*40NL*110 OAL*12SH*4F12 mmR118 mm—40 mm12 mm110 mm4$80.8
4DCR 120 010 160D12*R1*18FL*45NL*160 OAL*12SH*4F12 mmR118 mm—45 mm12 mm160 mm4$108.4
No graphite end mill sizes match those filters. Try a SKU prefix such as 2DBE or clear a filter.

Graphite milling selection guide

Choose geometry and flute count by the cut

The right graphite cutter depends on the feature, reach, chip space and machine rigidity—not diameter alone.

Ball nose for 3D contours

Choose ball nose graphite end mills for electrode contours, curved surfaces, ribs and mould details. Long-shank and taper-neck versions reach deep cavities while preserving clearance.

Square end for floors and walls

Square end cutters produce flat pocket floors, slots, shoulders and side walls. Two flutes maximize chip space; four or six flutes improve stability and finish in rigid setups.

Corner radius for stronger edges

A corner radius reinforces the cutting edge and suits radiused shoulders, fillets and rough-to-semi-finish electrode milling where a sharp square corner is unnecessary.

Graphite end mill buyer FAQ

Why use diamond-coated end mills for graphite?

Graphite is highly abrasive. A diamond coating protects the carbide cutting edge, slows edge wear and helps maintain dimensional accuracy and surface finish over longer production runs.

Which flute count should I choose?

Use two flutes for maximum chip room in roughing and slotting, three flutes for a balance of clearance and rigidity, and four to six flutes for stable high-speed finishing when dust evacuation is controlled.

What geometries and sizes are available?

This catalog includes ball nose, square end and corner radius tools, with standard-reach, long-shank and taper-neck designs from Ø0.2 mm to Ø25 mm.

Can you provide a dimensional report?

Yes. Every end mill is dimensionally inspected, and a measurement report can be supplied for incoming inspection, order acceptance and traceability.

Are the online prices final?

Prices shown are USD reference prices per piece, updated September 14, 2026. Send the SKU codes, quantities and delivery destination so we can confirm the current quotation, production schedule and shipping.

Can these tools machine CFRP or fiberglass?

Diamond-coated carbide suits many abrasive composites, but composite tool geometry can differ from graphite geometry. Share the laminate, thickness, operation and delamination requirements for selection.

Request pricing for your graphite end mill list

Send your SKU codes or drawing, required diameters, graphite grade, annual quantity and delivery destination. We will confirm the closest standard sizes or propose a custom diamond-coated geometry.

Send your graphite tool RFQ